Question about Intermatic Electrical Supplies
The skipper wheel must have all pins UP for daily watering. 6. PUT SELECTOR SWITCH IN AUTO: This switch can be used to turn the system ON or OFF for manual operation without affecting the set program
Question about Intermatic Electrical Supplies
water the lawn Turn black skipper wheel COUNTER-CLOCKWISE until todays day is in front of "14" arrow. Press pins DOWN on days of NO watering. The skipper wheel must have all pins UP for daily watering
Question about Ace Hardware Electrical Supplies
...turn on. instead water comes up through the disposal and into the sink. try using a 1/4 allen wrench and manually turning the blades. there is usually a hole in the very bottom (on the outside, under ...
Question about Flotec Electrical Supplies
...water to turn on a tethered float. the other pumps they sell at lowes with a real float (like the one in the toilet) are adjustable and also replicable. . I have the same problem. It's not the float ...
Question about Zoeller Electrical Supplies
...not trip it to turn on the pump. If I barely bump or touch the arm manually, the pump kicks on and pumps water just fine. Ugh. Me too! I keeps setting off my back up pump with alarm. Driving me
The garbage disposal turns on, but the blades are not rotating. It sounds like the motor is not turning over. Use wood stick or broom handle and see if blades rotate freely. If blades are stuck, then ...
Question about Ace Hardware Electrical Supplies
...turn and unclog the disposal. Since you hear the motor humming, this is a sign that you need to clean out the disposal. Try the link ...
turn off, but the pressure gauge stays at 30psi and does not go any higher so it just keeps running. All the faucets are closed and I don't see any pipes leaking. Is there a way to adjust the pressure
Question about Electrical Supplies
...Shaw thermostat It worked good for 6wks ,it quit working & the flash sequence was a steady on I turned the power off. I try's to come back on but fails before the burner ignites I would ...
Turn-on water level is 10" - 12" above pump base. Turn-off water level is 4" - 6". The manual also says that running the pump when dry will ruin the seals. This implies that the water level setting is
65 questions posted
Usually answered in minutes!
109 Questions
44 Questions
23 Questions