Question about Mr. Coffee Coffee Makers & Espresso Machines
...cleaning. now both cup lights flash and the descale light fo about 15mins then the cup lights stay on contsant and the fault light stays on at the same time. from what the manual says it thinks there ...
Automatic dispenser Our coffee maker will not go to automatic dispense. It heats, than goes to manual and stays there. Clean it, especially the window for the barcode reader clean the bar code reader ...
Question about Mr. Coffee Coffee Makers & Espresso Machines
The light for CLEAN does not stop blinking Clean it as directed. (I ran a load of vinegar through the coffee maker, then two loads of clear water.) Then, turn the power off for a minute. When you turn
Question about Mr. Coffee Coffee Makers & Espresso Machines
...cleaning light stays on when I try to brew a pot of coffee. I unplugged the unit for over 8 hours and when I plugged it back in, the cleaning light still comes on when I attempt to brew.I've done ...
Question about Mr. Coffee Coffee Makers & Espresso Machines
...light in as described. I am able to remove the infuser and have cleaned it thoroughly with hot water. Any ideas? Thanks! If cleaning the infuser doesn't work, sometimes the error will go away over ...
light is staying on, what do i need to do? The light stays on if you do not follow the instructions when descaling. You must hold the button for 3 seconds to descale. It takes about 20 minutes. If you
Question about Hamilton Beach Coffee Makers & Espresso Machines
...cleaning coffee makers. I put a little in the paper filter holder but without a paper filter, thinking the hot water would clean out those little gussets better. After turning it on and letting it ...
Question about Coffee Makers & Espresso Machines
...light is staying on. it is an older model but has been taken good care You recently cleaned? Depending on how I'd guess water or cleaning fluid got into the electrical parts. I'd let it dry out for a ...
how to cancel clean me light Unplug the machine for a minute or two. The light should go off and stay off. Machine off position press 2 shot button and press power button after and keep holding about ...
62 questions posted
Usually answered in minutes!
231 Questions
93 Questions
25 Questions
21 Questions
2 Questions