Question about Braun Tassimo Espresso Machine/Coffee Maker

3 Answers

Automatic dispenser Our coffee maker will not go to automatic dispense. It heats, than goes to manual and stays there.

Posted by marge618 on

Ad

3 Answers

Anonymous

Clean the bar code reader frequently if dos not go utomatically to the green light

Posted on Aug 17, 2008

Ad

Anonymous

Clean the bar code reader frequently if dos not go utomatically to the green light

Posted on Aug 17, 2008

  • 1 more comment 
  • michelehh Oct 06, 2010

    How do you clean the barcode reader underneath? Mine is all fogged up with condensation since I descaled it two days ago. Now machine will not go to automatic, only manual. Wiping it off does no good since the moisture is on the side of the window that can't be reached. Any ideas?

  • Michele Hoffmann
    Michele Hoffmann Nov 09, 2013

    Did you ever get an answer for this? Since a minor problem turns into a major issue since I can't brew any coffee!

  • Michele Hoffmann
    Michele Hoffmann Nov 09, 2013

    I keep the barcode reader clean but it looks as though the plastic is fogged from age and I am not sure if there is anything I can do about it.

×

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Clean it, especially the window for the barcode reader

Posted on Aug 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My coffe maker will not dispense water?


The heating element has gone bad. Since it is not a user-serviceable part, I recommend replacing the coffeemaker.

In the future, make sure you do not add water to the reservoir unless the coffeemaker has been turned of for at least five minutes. This will help prolong the life of the heating element.

The heating element will naturally degrade over time. But, it can incur sudden damage when the reservoir is refilled with water too soon - while the element is still hot. Because of the simple design, if the coffeemaker is on, then both the warming plate's heating element and the reservoir's heating element are on. So, after a brewing cycle is complete, the reservoir's heating element stays on. Without any in the reservoir to keep it cool, the heating element superheats. So, if water is put in the reservoir while the coffeemaker is on or before the element has adequately cooled, the sudden burst of steam from the water contacting the element can be quite violent.

Jul 13, 2014 | Mr. Coffee Coffee Makers & Espresso...

1 Answer

Starbucks Saeco Italia Digital Barista Fully Automatic Coffee Machine will not prime!


Here is what is said in the manual:

"Direct the steam arm on the drip tray.
Open the steam/hot water knob until a
steady stream of water is dispensed. Close
the knob. Insert the filter holder into the
brew head to pre-heat the filter holder.
The machine is now ready to dispense
coffee."

Apr 26, 2017 | Starbucks Saeco Italia Digital Barista...

1 Answer

I have a Bunn coffee maker with date code of 401406. It is almost 4 years old and still brews perfectly. The warming plate does not heat up any longer so the coffee will not stay warm after it is brewed....


The manual for this coffee maker can be found at this link:
http://manualheaven.com/assets/bunn-nhbx-b-contemporary-coffee-maker-manual.pdf
While the manual does not contain repair instructions, it does have some troubleshooting tips to follow if your coffee is not staying hot.

May 04, 2011 | Bunn NHB Coffee Maker

2 Answers

Reservoir heats but won't dispense


If you are pouring water in the manual brew basin, then check the sprayhead holes, then the spray tube, those could be blocked. If using the auto brew, check the solenoid and or brew switch.

Apr 26, 2010 | Bunn 12 Cup Coffee Brewers with 3 Lower...

1 Answer

Is there any way to disable the automatic shutoff on drip coffee


mine decided to disable that function altogether, and it wont shut off unless I unplug it. Nice, safe piece of ****, Hamilton Beach!

Apr 02, 2009 | Hamilton Beach BrewStation 47214 Coffee...

1 Answer

Saeco magic


I believe the model you have has no user-selectable temperature settings. The manual for the Magic line suggests preheating the cups as the fix. You can use the electronic cup warner OR run your tap/faucet water as hot as possible, fill the cup you're going to be dispensing espresso into with hot water while your Saeco warms up...right before you hit the button to dispense espresso, empty the hot water, dry the preheated cup and you're set! It only takes a few seconds. This way, you waste none of your coffee's thermal emergy on cup heating and your coffee will stay hot longer. Hope this helps!

Jan 02, 2008 | Saeco Magic De Luxe Espresso Machine

1 Answer

Delonghi Coffee Maker


You need to take the unit to an authorized repair shop and have the heating element replaced

Sep 01, 2007 | DeLonghi DCM485 Coffee Maker

Not finding what you are looking for?
Braun Tassimo Espresso Machine/Coffee Maker Logo

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Braun Coffee Makers & Espresso Machines Experts

Charles Tidwell

Level 3 Expert

475 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Cindy Wells

Level 3 Expert

6102 Answers

Are you a Braun Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...