element replacement Thread size ? 1 1/8" or 1 3/8" Thread size 1 3/8" and they have a socket that a screw driver will fit through to remove elements at hardware stores.
Can I reduce hose size from 1- 1/4 to a 5/8 garden I want to run 10 feet of 1-1/4 pvc pipe from pump that is under house to exterior wall, than adapt a 5/8 garden hose from the wall to a ditch 80 feet
How do I turn on the 1/4 turn sharkbite Cannot turn the 1/4 turn sharkbite valve When the handle is in the same position as the entrance and exit, the valve is open.. The stops on the valve are ...
reliance 501 electric water heater The "Box store" elements will not screw into the bottom threaded hole of my 40 gal reliance 501, seem smaller is there a difference? Reliance-Rheem may have changed ...
Question about Grohe Water Heaters
Installation problem: Grohmix shower valve 1 1/2'' extension I just purchased a home that has a Grohmix shower faucet with a 1 1/2'' extension kit installed. It doesn't work properly: I suspect that a
The pressure on my heat line monza 24 boiler is at 3 and its meant to be between 1 and 1 1/2, how do I release the pressure? best to turn down the temp this will reduce the pressure
How to replace anodes most on top of heater there is a 1 1/16 bolt head. that is the anode. unscrew to replace. takes a lot of leverage to get bolt loose. 1/2" socket with a pipe on it for leverage. ...
Question about Rheem Water Heaters
HOW TO REPAIR RHEEM TANKLESS WATER HEATER, MODEL RGT-74XP-1 HOW TO REPAIR RHEEM TANKLESS WATER HEATER, MODLE RGT-1, RHLP 10069000133 call 8662794566 tech support
nothing has worked. I haven't dropped it at all. The only answer I came up with is that maybe after 1 shower the humidity got to it? It has not been exposed to humidity except once. Can it be fixed or
219 questions posted
Usually answered in minutes!
335 Questions
250 Questions
267 Questions
222 Questions
96 Questions