I am putting a 2000 Dyna FXDWG Dash on my 2000 FXDS Conv. and need a wiring diagram to wire the Speedo and Indicator lights from my bike
Hi, Pbm4god for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk00mBKKKHPAFx8pozKdwd76dlkcQSA:1615192956779&source=univ&tbm=isch&q=2000+Harley+Davidson+FXDS+wiring+diagram&sa=X&ved=2ahUKEwjmtbrTpqDvAhUZQzABHehzBo4QjJkEegQIARAB&biw=1440&bih=757
http://www.mediafire.com/file/l8mk1291i3fiprh/2000_Harley_FXD_Servive_Manual.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://mybikemanuals.com/harley-davidson/harley-davidson-dyna-glide-owners-manuals/
https://www.6ya.com/how-6ya-works to speak to me personally.
SOURCE: Trying to install a harley davidson tach on 2007
The pink wire goes to the pink eng rpm signal wire coming from the ecm. Go to the stealership and ask 'em to show you where it is.
Aloha
SOURCE: scematics for starter removal 2000 dyna fxds
Remove battery and batt box. Remove primary cover. Look for jack shaft and take off locking nut retainer. Unscrew shaft bolt. Go back over to starter side and remove 2 allen bolts. Start slides back toward you. Drink a beer.
SOURCE: will a gas tank off a 5 harley dyna wide glide
It sure will!! You answered your own question. guess i get no points for this one.
SOURCE: I have a 2000 fxst--when i start the bike and rev
2 things, bad speedo or your speed sensor picked up some metal. Or both. The sensor is located on the right side on the trans.Pull one allen bolt and GENTLY pry the sensor out. Wipe off the metal shaving. The speed sensor is MAGNETICALLY triggered, so it picks up metal from the trans and shorts out. Possible bad wiring connection somewhere too.
SOURCE: I'm installing a harley mini tach ( 3 wire ) on my
There should be a light green or violet wire coming from speedometer this is your database wire. This is were you hook up your last wire. Hope this helps, from 04-to 07 the wires are pretty much the same color.
wires from speedometer:
light green/ violet = database
black= ground
orange/white= inst power+12vdc
372 views
Usually answered in minutes!
×