I'm looking for the paint colour of my ford focus titanium reg EF62UBD it says chassis number not recognised wfolxxgcblct23711

Nigel,

Check out this link: http://www.focusst.org/forum/focus-st-electronics/3350-instrument-cluster-display-brightness.html

unfortunately,...it doesn't sound like there are a lot of options

by the 2009 ford mondeo colour chart
possibles are
3CYCWWA-Ink Blue- Pearl -code E
8CWAWWA Blazer Blue - Solid- code A
car may have be resprayed or repaired

you need the colour code on the riveted plate or door frame sticker to confirm it is code A

any auto paint shop can make the 2009 up using its formula listing
or super cheap has small spray touch up cans

Those look like the factory wheel to me, there is a part number on the inside of the wheel.

Scrapyard i would imagine but its not old that a new one from a ford dealer wouldnt be available ,so instead of browsing the internet walk to the dealer with the chassis number and iam sure they will oblige ,Scrapped one of these last year owing to problem with a corroded chassis number ,imported UK reg vehicle and put on spanish plates but teh chassis number on the floor had the last number corroded away so it failed the inspection .The effort of getting it re stamped was more than the car was worth as it was a rust box with duff canvas roof

Colour code is normally on a plaque beside the bonnet release mechanism under the bonnet. If there are two plaques one is for the car chassis number (VIN), make + model, the other is for trim specification and colour. Make a complete note of everything and most auto paint shops will pick out the four figure code to look for. Alternatively, phone up Seat parts department and quote them the VIN chassis number and simply ask them for the paint code, they will have all the details of every car ever made by VAG on their computer records.

yes i can make you happy post the radio chassis number so i can generate the code ,it starts with M and its on radio body ,you should see once it comes out

try to refresh them with a grinding polisher like safecut or similar is the same compound with one who the painters use to remove scratches from the cars paint.dont use electric polisher try by hand amazing results!i have done this to mine.

new hood primed and painted will probably run you $300 or so... you can probably find a much cheaper one at a junk yard

get in contact with your local ford dealer tell them your problem usually you have to give car make and model and also registration plate details,colour,then they should be able to give you the correct code to unlock your stereo,,hope that helps,goodluck

you will probably have to remove the radio and look for the serial number on it i dont think you could even get that info out of the book for the vehicle some manufacturers use so many differenet kinds of equipment its not even funny