Question about kawasaki Versys Motorcycles

1 Answer

FI LIGHT COMES ON AND LOSES POWER THEN IT SHUTS OFF THEN FINE

I HAVE A 2006 1600 VULCAN NOMAD THE FI LIGHT COMES ON THEN THE BIKE WILL SPUDDER THEN WHEN I GIVE IT GAS THE LIGHT WILL SHUT OFF THEN THE BIKE RUNS FINE. IT DOES IT MOST OF THE TIME WHEN I SLOW DOWN QUICK. IS THERE A SENSOR OR IS THE FI PUMP.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

It could need the ECU software updated, some manufactures are still screwing up they're fuel injection, the dealership should do free of charge. Failing that it could be something as simple as dirt in the injectors which should work itself free in time. Cant see it being something major on such a new bike, as I said contact your dealership to see if there's an update.

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 Kawasaki Vulcan 1700 Voyager FI light on


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
FI light on with friends bike
Kawasaki Fault Codes
Kawasaki Vulcan 1700 Voyager ABS Service Manual
OEM Parts for Kawasaki
Kawasaki Vulcan 1700 Voyager Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 19, 2014 | 2011 kawasaki Vulcan 1700 Voyager

1 Answer

2004 Kawasaki Vulcan 1500 Nomad FI light stays on


Hi, Anonymous it should be noted that the reasons your FI light stays on constantly or flashes and your bike will or will not start and may turn over or not, these conditions will vary from bike to bike depending on the year, make, and model and you should always refer to your owners/service manual for proper diagnostic procedures. It should also be noted that any type of prior work done to the bike or an abnormal event occurrence IE: adding accessories, electrical curiosity/adventures, laying the bike down/crashes, rain storms/bike washings just before FI light issues started can be significant hints/aids into tracking down the gremlin. The newer the bike the more sensitive the ECM becomes and will not let the bike start when aftermarket accessories have been installed without being reprogrammed. That being said the usual suspects are:
1. Faulty Fuel Pump, fuse or system relay switch.
2. Battery starting to fail due to old age/damage, perform a load test.
3. A discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Faulty safety switches/sensors: run/off, ignition, clutch lever, neutral, side stand, tip over, fuel, and or their connections.
5. Broken wire or worn insulation exposing wire to a ground situation especially inside wire harness at tight bends around fairing brackets, under dash panels, under fuel tanks over cylinder heads etc. Many harnesses are open on the ends that will allow water to enter and accumulate at v-bends.
Dielectric grease and contact cleaner are your best friends for wire/cable/harness connectors, look for corroded, broken, or loose pins/sockets.
6. Installation of aftermarket accessories ie. exhaust systems, mufflers, air cleaners, fuel tuners, electrical component etc.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Nomad FI light comes on Kawasaki Vulcan Forum Vulcan Forums http://www.kawasakimotorcycle.org/forum/faqs/5165-nomad-fuel-injection-light-stays.html
Kawasaki VN1500 CLASSIC TOURER Service Manual
OEM Parts for Kawasaki
2003 Kawasaki Vulcan 1500 Nomad Fi Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 28, 2014 | 2004 kawasaki Vulcan 1500 Nomad

1 Answer

2002 Kawasaki VN 1500 Vulcan Classic Tourer - Fi light comes on


Hi, Anonymous it should be noted that the reasons your FI light stays on constantly or flashes and your bike will or will not start and may turn over or may not and run great or sputter, these conditions will vary from bike to bike depending on the year, make, and model and you should always refer to your owners/service manual for proper diagnostic procedures. It should also be noted that any type of prior work done to the bike or an abnormal event occurrence IE: adding accessories, electrical curiosity/adventures, laying the bike down/crashes, rain storms/bike washings just before FI light issues started can be significant hints/aids into tracking down the gremlin, also carry the appropriate jumper wire to access fault codes to reduce the risk of being stranded or towed. The newer the bike the more sensitive the ECM becomes and will not let the bike start when aftermarket accessories have been installed without being reprogrammed. That being said the usual suspects are:
1. Faulty Fuel Pump, fuse or system relay switch.
2. Battery starting to fail due to old age/damage, perform a load test.
3. A discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Faulty safety switches/sensors: run/off, ignition, clutch lever, neutral, side stand, tip over, fuel, and or their connections.
5. Broken wire or worn insulation exposing wire to a ground situation especially inside wire harness at tight bends around fairing brackets, under dash panels, under fuel tanks over cylinder heads etc. Many harnesses are open on the ends that will allow water to enter and accumulate at v-bends.
Dielectric grease and contact cleaner are your best friends for wire/cable/harness connectors, look for corroded, broken, or loose pins/sockets.
6. Installation of aftermarket accessories ie. exhaust systems, mufflers, air cleaners, fuel tuners, electrical component etc.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Nomad FI light comes on Kawasaki Vulcan Forum Vulcan Forums Kawasaki Fault Codes
Kawasaki Vulcan 1500 Classic Fi Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 13, 2014 | 2002 kawasaki VN 1500 Vulcan Classic...

1 Answer

2002 Kawasaki Vulcan 1500 Nomad timing adjustment


Hi, Dale for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Ignition Timing Kawasaki Vulcan Forum Vulcan Forums
Vulcan 1500 Classic setting the timing part 1
Kawasaki Vulcan 1500 Classic Fi Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 1500 Nomad Fi Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Apr 06, 2014 | 2004 kawasaki Vulcan 1500 Nomad

1 Answer

2000 Kawasaki Vulcan 1500 Nomad kickstand safety switch location


Hi, Patricia for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2000 Kawasaki Vulcan 1500 Nomad kickstand safety switch location Google...
Kawasaki Vulcan 1500 Sidestand and Starting
Kawasaki Vulcan 1500 Classic Fi Service Manual
OEM Parts for Kawasaki
2000 Kawasaki Vulcan 1500 Nomad Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 09, 2012 | 2004 kawasaki Vulcan 1500 Nomad

2 Answers

Need radator for kawasaki vn 1500 classic tourer 2001 is the driffter the same radator as the vn 1500 classic plz hellllllllllllp


TO ALL VN1500 OWNERS....This once happen to me,
I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds..
Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars,
When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.

Feb 06, 2012 | kawasaki VN 1500 Vulcan Classic Tourer Fi...

1 Answer

2003 kawasaki 1500 fi nomad - No battery power to bike. Battery charged, no lights or displays, main fuse and and fuses in fuse box OK.


Ok, locate and check the fuse at the starter solenoide, this is the main power fuse, follow the red battery lead until you locate the solenoide, here you should find under a cover a 30 amp fuse, hope this helps , paul

Feb 27, 2011 | 2003 kawasaki VN 1500 Vulcan Classic...

1 Answer

On my 2004 Vulcan Nomad, the clutch is very sticky from a stop it grabs about half way out then it grabs a second time as I fully release the clutch lever. I have to be careful on the throttle not to give...


Hi, Anonymous the answer to this question is way above my pay grade for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
hydraulic clutch bleeding
2003 Kawasaki Vulcan Nomad 1500 Fi Clutch Removal
Kawasaki Vulcan 1500 Classic Fi Service Manual
OEM Parts for Kawasaki
2003 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 26, 2010 | 2004 kawasaki Vulcan 1500 Nomad

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4974 Answers

yadayada
yadayada

Level 3 Expert

80263 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...