2008 Piaggio Fly 125 Logo
M
Mark Stubbs Posted on Jan 08, 2016

Piaggio fly 125 tries to start but then makes a constant noise like a car revving.

I had a new belt and serviced 2 months ago. Bike has cut out on low revs a couple of times. Hasn't been started for 2 weeks now and makes a noise to try and start but then just starts making a noise like a car revving. Any help will be appreciated

5 Related Answers

Anonymous

  • 1672 Answers
  • Posted on Aug 08, 2011

SOURCE: i got a piaggio fly 50 4v that stop at the middle

Hi,
Check these parts.....

  • spark plug that might already fouled up and needs cleaning.
  • spark from ignition coil, if there are no sparks the CDi got problem
  • carburetor, check if there is a fuel going into the carb, choke it by hand, fuel moist must be seen on your hand. If not no fuel is flowing into the carb.
  • check fuel filter if fuel is coming out continuosly.


Hope that helps you out!

Ad

Anonymous

  • 1341 Answers
  • Posted on Aug 29, 2011

SOURCE: hi its a piaggio nrg

It seems you had water leaking out which could be the result of a blown gasket. There is a strong possibility that the engine has seized up due to overheating and hence cause the belt to snap. I may be wrong but that is based on my experience. I hope that this helps. Good luck.

Tony Crow

  • 578 Answers
  • Posted on Mar 23, 2012

SOURCE: piaggio fly 50

the diode in the alternator has blown , test alternator ,

Testimonial: "thanks Tony! My mechanic has had the same diagnosis. So your post has given me a very comfortable feeling. "

czaa

Arnie Burke

  • 7339 Answers
  • Posted on Feb 25, 2013

SOURCE: piaggio mp3 125cc motorcycle, won't start and emits high-pitched "whining" noise, last garage-serviced October 2012

chec alternator for health--sounds like bearings are bad--du u gut a repair book for that model--git one online or checout library sec 629--its a basic component so othr manual can help u

MrMopar64

  • 36 Answers
  • Posted on Jan 10, 2014

SOURCE: no compression in piaggio diesis 100cc

could be as little as a head gasket up to broken piston bent valves broken cam etc. was it over reved

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer
0helpful
1answer

Where do i get replacement keys for a piaggio vespa fly 125

dealer can order you new key from serial number
0helpful
1answer

Where do i get replacement keys for my vespa piaggio fly 125

i can get them but if it has an immobiliser on it the new keys will need a code to be put onto the chip inside them to work.you should have a code card that came with the bike from new ?its white and blue.
0helpful
1answer

No compression in piaggio diesis 100cc

could be as little as a head gasket up to broken piston bent valves broken cam etc. was it over reved
0helpful
1answer

Whirling noise on start up and constant tinkling

Okay, think after process of elimination I now know what the offending part is. It seems that the Starter Pinion is not disengaging fully, and rattles about. So will replace this, finders crossed this solves the issue.
Not finding what you are looking for?

264 views

Ask a Question

Usually answered in minutes!

Top Piaggio Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Ngoro

Level 3 Expert

3523 Answers

Are you a Piaggio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...