I want to put a deuce rear wheel on the 2009 low rider..the deuce rear wheel uses a 3/4 " alxe.will this fit ? I think the rear axle on the 2009 is 25mm?
SOURCE: greese fitting in the rear of a warrior atv
replace carrier bearings they are sealed bearings no need for a grease zirk would not keep bearings lubed.check swingarm bearing play. if worn, best to replace while repairing carrier,to save on labor repitition.turn wheels around & check for interference w/ brake caliper.wheel spacers are commercially available for this model. check ebay.
SOURCE: Deuce Tank
i have just bought a set of tins from amercia they are 2003 and i have a2007 deuce. and yes there is a bracket welded to the right side of the tank in 2007. so now i have to figure out a way to get around this problem a lot of thinking to do terry
SOURCE: 93 Dyna low rider fork oil.
your local hd shop should be able to answer this for you as its a mesured amount and to much or too little will make the bike not handle right
SOURCE: what is the sequence of putting spacers on rear
Not much on newer hogs but I'd guess if the spacers aren't the same length when you got the wheel on you'd see that the wheel isn't centered.Try again.Put the end thru the swing arm put on a spacer,push it thru the hub,put on the other spacer,push it thru swing arm put on washers and nut[loosely]and check the alaignment.Like I said I'm not much.
Testimonial: "Your suggestion was very helpful. Thanks! "
146 views
Usually answered in minutes!
×