Iv got a Tm 80 bin told it's a 93 so hard to come

I have a homelite piston running in my Husqvarna edger . Most pistons for engines are all the same if the cc's are the same . they only vary in the gudgeon pin size and the location of the pin in the piston. So take your piston to a small engine wreckers and any piston that measurers the same ,looks the same will do the job. then get a new piston for the make that it came out off and it will fit.

Even with power to the injectors you still may have a clogged injector .

You need to free up some room on your computer. The game looks like it is requiring 39-40 gb of free disk space, and your pc only has 29gb of room. Try lookin at big hunks of media that is saved on your desktop. Normally video files are the largest. If you don't need them delete them. This will free up some space to install the software.

STRIP THE COVER OFF THE SIDE OF THE ENGINE AND SEE IF THE INTERNAL PISTON OPERATES WHEN YOU PRESS THE LEVER AND RETURNS WHEN YOU LET IT GO IF ITS OK STRIP THE CLUTCH AND CHECK ALL THE PLATES THEY MIGHT BE STUCK TOGETHER CAUSING THE PROBLEM.

If it is then it will be leaking brake fluid. Look under the car near the gearbox to find it. Check the fluid level in the container.

If the clutch is slipping then you might well need new clutch plates or the slave cylinder piston/and or clutch rods may be sticking.
If the clutch is dragging then it might be low on fluid, need bleeding or a clutch master/slave kit.

Hello Please see the image below for correct jumper setting
Hope this helps, if so do rate the solution

using vb how can i change font size an epson tm88 prints

new codes for Telewest 10 may 2009

5A 01

00 - AA B7 D1 D9 CE 8E 83 AF

01 - 8E 80 D7 EF 44 93 02 2B

codes same as 7 may 09 just re insert it and save .. and it will work..

Raj karega Khalsa

telepest codes-
00-AA B7 D1 D9 CE 8E 83 AF
01-8E 80 D7 EF 44 93 02 2B
for 7/05/09