The Condenser only gets replaced if it is damaged & leaking
If you have a major compressor failure it could catch debris
So forget that
The Compressor will show how it is doing on the A/C
manifold gauge set,as far as cycling pressures & they
could jump it if you had control issues
So assuming no leaks & proper charge, as you do
Not that
It is not coming on because the system does not sense
enough BTU's of heat & the need to do so
I can not help you as to the system components as I
have no data at all
This is a social web site & very helpful to a lot of folks
If it has an electronic module involved, then they should use
a scan tool to command the system on,& you will find your
problem
I would, as they should have, a system schematic or they
are lost with no where to even start
336 views
Usually answered in minutes!
×