How do i disasemble a rear end to get the axles out on a 1992 b2200 mazda

Yes Cory, spot on!

https://www.google.com/search?q=1992+mazda+b2200+firing+order&safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk014Lxsut1eZow7bpTSrwep_0ghn5Q:1619711073323&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiIw6f55aPwAhVHaM0KHXeaCpcQ_AUoAXoECAEQAw&biw=1920&bih=937

here is a picture of a ****** for it...maybe you can find
http://images.canadianlisted.com/nlarge/1992-mazda-b2200-automatic-transmission-first-offer-takes-it_4471600.jpg

While looking for my fan blade, I saw several B2200's at pick n pull, and other salvage lots in Carson City, Nv.

use a plastic trim paint(for plastic bumpers)its cheaper than replacement.....

will need the original wheel tools is about 4 foot long with hook on one end and square solid tool joint on the other which takes the handle supplied. go to the rear of the vehicle and insert the tool into the slot on top of the spare wheel and wind anti clockwise until the wheel is onthe ground

i have the same problem it turns over and its back firing could it be timing

1992 MAZDA B2200 L4 - 2.2L - FI - - GAS

Part Number RN12YC - .035"

Hope this help (remember rated this) Good luck.

this site has all the specs
http://www.mazdatruckin.com/B2200//B2200_Timing_Belt.html

Is it standard shift??? if so, look under the truck and see if the drive shaft is turning. It could be the clutch, U-joint, or the rearend gone out.

I had something like this before. There is a fuel saftey switch near the gas tank right by the rear end. Its a roll over sensor and mine fell off the mount and I guess the truck thought it was upside down :)