Question about 2005 Jeep Wrangler

2 Answers

Cruise control does not work on 2005 Rubicon. Light on dash work , but cruise control doesn't

Posted by on

  • CakeNeggs Sep 13, 2008

    Cruise was working, then just stopped while on a highway trip. Dash light comes on, but set/coast/resume don't function. Is this tied to any vacuum issues?

  • Anonymous Sep 16, 2008

    Cruise Control light on dash works, cruise does not. I have a 2004 Jeep Wrangler Unlimited.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

On my 05 Wrangler Unlt'd Ruby - The vacuum hose on the drivers side of engine had come off, which disengaged my Cruise and the actuator which determines whether my heater points to the vent, Defrost or feet. Put it back on and secure with a cable tie.

If it is like mine, you will then have idling problems, especially when coming to a stop. You will need to clean the throttle body because the engine has picked up **** through the open port while it was off. Directions for that exist on this site elsewhere.

All of these are easy - i hadn't worked on a car in >25 years and it took me 30 min.

Posted on Sep 16, 2008

I have a 2004 Jeep Wrangler Unlimited with the same problem. Cruise Control light on dash works, but cruise does not.

Posted on Sep 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I activated the cruise control on my 95 Nissan Sentra and now it won't disengage...any suggestions?


Cruise Control Problem - Nissan Forum

www.nissanforums.com/b13-91.../135028-cruise-control-problem.html
Jun 21, 2007 - 4 posts - ‎3 authors 1994 Nissan Sentra 4Door XE with 5 Speed Manual, GA16DE, 230k Miles. ... Now theCruise control light in the middle of the dash will NOT light up and the cruise control will not engage no matter what button I push. .... Cruise Control NOT working.. sentravis, B14 95-99 chassis, 26, May 29th, 2009 12:24 ... speedometer not working?
15 posts
Aug 3, 2007
Solution for P0500 VSS speed sensor problem on Nissan ...
15 posts
Jul 10, 2007
Solved flashing cruise control light
8 posts
Sep 8, 2006
cruise control problem
11 posts
Jul 13, 2005
More results from www.nissanforums.com

Sep 30, 2015 | Nissan Cars & Trucks

1 Answer

My Cadillac sts 2005 4.6 cruise control doesn't


Cadillac has a cruise control system that becomes disabled when there is a fault in either the suspension, abs, traction control, or engine management system. The car needs to be scanned to find the cause

Apr 21, 2013 | Cars & Trucks

1 Answer

CRUISE CONTROL WON'T WORK ON 2005 CHEVY TRAILBLAZER


check cruise control fuse and check the brake lights see if brake light working because the brake light switch will deactivate cruise control when brakes is applied.if brake lights dont work either fuse blowed or switch bad.if all is good have vechicle code scan because cruise control control by PCM and vechicle speed sensor and thottle actuator control motor.

Apr 17, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

2005 buick lesabre cruise control doesn't work


have a look at the cruise control cable that goes next to your throttle cable next to your throttle body for looseness

Oct 10, 2012 | 2005 Buick LeSabre

1 Answer

Cruise control not working


The adjustment of the brake light switch or it could be bad. the brake lights can work fine and the part of the switch that works the cruise doesn't The swiches that control it from the steering wheel can losse connection in a part called the clock spring. Vacume connections can effect the cruise but yours is likly cables less therefore doesn't work the cruize.

Oct 09, 2012 | 2005 Chevrolet Equinox

1 Answer

Horn doesn't work,abs light on dash stays on and also cruise control does not work either


Typical reason for no cruise and horn is a bad clock spring underneath the airbag. Typically you have an airbag light on as well and not an abs light

Aug 21, 2012 | 1998 Nissan Quest

1 Answer

2005 Chrysler town&country cruise control stopped working


Does the cruise control lights come on when you select it? If it doesn't then you may want to check the fuse(s) that give the system power. If the fuse is blown then try replacing it. If it blows again when you try to use the cruise control then the unit it self may be bad and need replacing. You can find the fuse box location and the right fuse for it in the owners manual of the car.

Jun 28, 2012 | 2005 Chrysler Town & Country

2 Answers

Cruise Control on 2 door Sport 4x4 with SOHC: Non-working cruise control. When turned on, cruise control does not engage, no dash light indication either.


look in your owner's manual for the location of the cruse control fuse it is different from other fuses usually much larger

May 21, 2009 | 1999 Ford Explorer

3 Answers

Cruise control is not working on 1987 Mercedes 420SEL. Any quick fix?


I removed the module from under the dash and resoldered all of the connection ( that took a few days ) and re installed it. It has worked ever since.

Mar 28, 2009 | 1987 Mercedes-Benz Mercedes Benz 400 Class

1 Answer

2005 Jeep Wrangler Cruise Control


no fuse ...sounds like the switch may have gone bad

Nov 08, 2008 | 2005 Jeep Wrangler

Not finding what you are looking for?
2005 Jeep Wrangler Logo

1,104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...