2006 impala passlock cliking in starter - 2006 Chevrolet Impala

Chevy Impala 2008 won't crank and won't start, fix found ...

? 1:43
https://www.youtube.com/watch?v=ITvU_vXMrDY
Nov 26, 2012 - Uploaded by Artome001
Chevy Impala, 2008, does not crank or start. ... 2003-2007 Chevrolet/GMC Silverado/Sierra No Start/no crank/electrical issue FIX - Duration: ...

2006 Chevy Impala / MC No Crank/start FIXED - YouTube

? 5:42
https://www.youtube.com/watch?v=dGF0Ohbj5xg
Jun 8, 2015 - Uploaded by Jair Duarte
2006 Chevy Impala / MC No Crank/start FIXED .... 2003-2007 Chevrolet/GMC Silverado/Sierra No Start/no crank/electrical issue FIX - Duration: ...

Passlock Security system... - Discussion on Topix

Why do think the key security is bad? If you still have a factory key, this is not the problem...if no factory key, you can take your VIN number or original key to GM dealer to get new key that they will program for you...Check for dirty battery connections:)

Take your starter out and have it checked at your local parts shop and if it passes maybe in the computer.

it may b the passlock system in it.try resitting it

This link may help you with the security problem.
http://vatspasslockpasskeysecurityhelp.yolasite.com/

Passlock sensor in the ignition switch is probably bad.try starting the car,when it does not start leave the key in the run position for 10 minutes,then try to restart the car.(after the car sits for ten minutes the security light should be out.) If it now starts you need a new passlock sensor.

Your Passlock may need to relearn the ignition keys, if the ignition lock has gone bad like my in-laws Grand Am Gt, here is what i did so they will not get stranded any more. Buy a Passlock by pass module for around $70.00. You can order one from GMPASSLOCK.COM in the mean time try resetting the Passlock. Good luck

Ignition keys relearn takes about 30 min to do. 30-Minute Learn Procedure
1.) Turn ON the ignition, with the engine OFF.
2.) Attempt to start the engine, then release the key to ON; the vehicle will not start.
3.) Observe the SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF.
4.) Turn OFF the ignition switch, and wait 5 seconds.
5.) Repeat steps 1 through 4 - two more times - for a total of 3 cycles of 10 minutes. 3x10 = 30 minutes.
The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch turn from OFF to CRANK Important: Turn the Ignition Switch OFF. The vehicle learns the Passlock Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.
6.) Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password.
7.) With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles.

Without a scan tool you may have momentary starter interruptions while history clears itself.

yr gonna have to get the passlock key and punch it into the radio so u can solve ur problem most chevy dealships can assist you with that.

install a remote starter this will by pass the passlock system.

I did a complet brake job on my 2004 Chevrolet Impala about two weeks ago, and i still have warning light on. Thw system is working great. So how do I turn off the warning Lights, Traction off light, Brake light, and in warning center Low brake fuild?