Whats the firing order and where do the wires go on the distributor cap s-10 1988 chevy pickup with 2.8 v6

SOURCE: distributor cap firing order 1993 chevy cheyenne truck v6

Firing order is 1-6-5-4-3-2 cyls. # 1-3-5 on drivers side front to back and cyls. # 2-4-6 passenger side front to back.

SOURCE: Need to know how the plugs go back on the

Hi my name is David =d_hubbs . Your Firing order is 1-8-4-3-6-5-7-2 Clock wise Rotation. NOTE make sure you know where your #1 Wire starts at on the Distributor Cap. To know for sure Reove your Coil Wire so it won't Start --Remove #1 Spark Plug which is on the Drivers side Front Plug. Have someone Bump the Engine a Little at a Time Until You Either see pressure Rise on a Gauge or Just Put your Finger on The outside of the #1 Spark Hole ---When you feel AIR ==Compression out of that Cylinder. .Your at TDC on Compression Stroke. Just Remove Distributor Cap.Look a Rotors Position in your Cap Which ever Spark Plug Hole in your Dist,. Cap is Closet to is where you Start your #1 Plug Wire.Its Possible you went Slightly Past Number 1 ,If so Just move ALL plug Wires 1 Hole Back Counter Clock Wise.And you Should be Good To Go. Please Let me Know how my solution helped you by Voting For me and Leaving a Testamony. Thanks From:---d_hubbs

Jeffrey Turcotte

• 8991 Answers
• Posted on Oct 11, 2010

SOURCE: whats the firing order and where does the wires go

from autozone.com

Testimonial: "thanks for the info it helped alot made job easy to do it was easy to understand with the diagram once again thanks"

Jeffrey Turcotte

• 8991 Answers
• Posted on Jan 09, 2011

SOURCE: i need the firing order

1-6-5-4-3-2. Thanks for using FixYa!