Question about 1984 Chrysler Fifth Avenue

1 Answer

When a push gas pedal suddenly it kills de engine

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

You may need to hook it up to a scanner, and check for fault codes. this could lead you in the right direction. maf sensor fault or ambient air temp fault etc. thats where i would start if the engine light is on which it should be there will be some type of fault code, I would say either maf sensor or fuel pump.

next visually check connections and wiring at said faulty sensor, broken rubbed through wires and moisture may cause problems but usually it s the sensor. unfortunely.

if this does not correct the problem may need to take it to a garage

good luck!

Posted on Sep 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

What causes shaking while accelerating


Mrs Amanda when you said on pushing the gas pedal is shaking do you mean the whilst accelerating with engine running ( reving) you do receive a shake? or when pushing the pedal you do feel on the pedal with engine off a shake? If it is the first check for any spark plug or spark plug HT Lead not working and cause the engine to shake. If is the second cause then check for your pedal connection cable etc.

Apr 26, 2014 | 1999 Toyota Camry

1 Answer

Accelerater problem


does the check engine light come on nissan has software issues may need to reflash pcm

May 28, 2013 | 2008 Nissan Sentra

2 Answers

2005 Chrysler PT Cruiser was running and after putting a couple of Gallons of Gas in the tank and continurd driving, all of a sudden the vehicle seemed to loose execleration power and would not start or...


I HAD SIMILAR PROBLEM MY 2005 PT SUDDENLY JUST SEEMED TO CHOKE DOWN AND PUSHING ON GAS PEDAL MADE IT WORSE SO I LET UP ON PEDAL AND THEN SLOWLYMPH ACCELERATER BUT I WOULD ONLY GO ABOUT 50 MPH AND THE ENGINE LIGHT CAME ON I CHECKED OIL IT WAS FINE I THEN PUT A CAN OF SEA FOAM IN GAS TANK AND DROVE SLOWLY A WAYS THEN SPEEDED UP IT RAN FINE SEEMED TO BE DIRTY INJECTORS OR FUEL PUMP. I WNT ON HOME THE ENGINE LIGHT STAYED ON THE NEXT MORNING THE ENGINE LIGHT WAS OFF AND IT HAS RUN FINE EVER SINCE

Oct 19, 2012 | 2005 Chrysler PT Cruiser

1 Answer

Starting and coming to a stop killing engine.


Did the problem come on suddenly or was some previous action or work done...

Nov 29, 2011 | 1995 Lincoln Town Car

1 Answer

Starts and runs good then suddenly ck eng lite come on and it dies. Will start back up with holding gas pedal on floor and die again soon...repeat...


Your vehicle is equipped wit the OBD!1 (on board diagnostic system ) when your check engine light turns on it is setting a code. You need to have it scanned to get this code. This will point you in a direction to your problem. When you place the accelerator to the floor you put the system in the clear flood mode which is allowing you to start but then the problem takes over and kills the engine.

Feb 20, 2011 | 1994 GMC Sierra

2 Answers

Engine suddenly revs when stopped & @ idling


sounds like one of the metal arms connected to the engine may be getting stuck some how. have someone get in car and press on gas when car is off while you watch engine to see what is moving, then check those arms to see if there is any possible obstructions or knicks or something on them

Jun 16, 2009 | 2004 Mazda 6

1 Answer

Motor bogs down at stoplight when pushin gas pedal


sounds like a typical throttle position sensor problem, ye before you get there check the air filter and make sure that youf fuel is not contaminated it is either your TPS or the air flow meter is going bad both are expensive sorry

Nov 08, 2008 | 1990 Volvo 740

1 Answer

Motor bogs down at stoplight when pushin gas pedal


The fuel pump relay will cause a stalling or no start condition. You are likely having mass airflow sensor, fuel pump, or fuel pressure regulator issues.

Bret
RepairPal.com

Nov 08, 2008 | 1985 Volvo 740

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...