1996 GMC Sierra Logo

Related Topics:

Posted on May 05, 2010

I have a 1996 GMC Sierra with an automatic transmission and just recently as i had been driving for about two hours it dropped out of overdrive for about ten minutes or so then re engaged. then i noticed it was shifting hard from 1st to 2nd gear...This only happens hen i have driven for a while (around an houror more) could it just be the trans filter just needs to be changed

1 Answer

A

Anonymous

The filter has nothing to do with your issues.

Check for a loose or misadjusted brake switch, for the OD issues.

Maybe Electronic,Sensors or Selenoids,on the shift issues.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I fix automatic transmition in 2002 GMC ENVOY 4x4 shifts hard into third will not shift into overdrive already replaced the two solenoids in front before it would not shift to third

How To Rebuild A 4L60E Automatic Transmission - YouTube

? 13:19
https://www.youtube.com/watch?v=JpmJtuVrdWk
Mar 16, 2011 - Uploaded by Nick Stageberg
How To Rebuild A 4L60E Automatic Transmission ... Also here is a link to some common break/fixes that may require a rebuild:... GMC canyon, envoy, safari savana, sierra Sonoma, Yukon, ....Great video, my 96 sierra 4x4 when shifting into high gear motor races as if nothing is there........................always ...

30 Common 4L60E Transmission Problems & Repair ...

www.twincharlotte.com/transmission-repair.../30-Common-4L60E-Trans...
Mar 18, 2011 - The 4L60-E is an automatic shift, four-speed overdrive, longitudinally...... 4l60e 2002 gmc 4x4 was not driven for 1 year,will not shift into 3rd or ... I have a 2005 GMC envoy 4x4 6 Cylinder I assume it is a 460LE Transmission.
0helpful
1answer

1995 gmc with automatic trasmission jerks in overdrive but not in 3rd

it looks like a tcc (torque converter clutch)circuit problems or torque converter clutch itself
hope it helps
0helpful
1answer
1helpful
1answer

How to properly engage and dis-engage 4 wheel drive 0n 1996 gmc sierra

  • Shifting from 2HI to 4HI Press and release the 4HI button. This can be done at any speed, and the front axle will lock automatically.

  • Shifting from 4HI to 2HI Press and release the 2HI button. This can be done at any speed, and the front axle will unlock automatically.

  • To shift from 2HI or 4HI to 4LO, the vehicle must be stopped or moving less than 3 mph with the transmission in NEUTRAL

  • Hope this helps.
1helpful
1answer

My 1996 GMC Yukon 4x4 transmission will only drive in 1st and 2nd

It will take off from a stop in overdrive but as soon as it shifts into 3rd at about 30 miles per hour it jumps into neutral? If yes, you have a burnt 3/4 clutch. The transmission will need rebulit. Cost of about 1600 dollars.
0helpful
1answer

94 gmc 4x4 1500 overdrive sometimes works

Check for a transmission speed sensor fault (OBDII scan). Loss of speed sensor signal will result in no torque converter lock up, and no overdrive. Also transmission filter should have been changed at 80,000 miles. Age of your vehicle(1994) warrants the filter service. Transfer case (4WD) needs to be serviced as well.
0helpful
1answer
0helpful
2answers

95 GMC Sierra 4L60E will not shift down to 1st or up to 4th.

no power stuck in 3rd gear electric shop unless youve burnt it up good luck...www.TransmissionGarage.com
Not finding what you are looking for?

343 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...