At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I take it your alarm has remote start? If so, pull the panel above the drivers feet and look for where the yellow "start" wire has been cut and each end will be ran separately into your alarm. reattach both ends of the yellow wires.
I had same problem . There is a vacuum resovoir tank located behind the left front splash shield . The vacuum line behind the battery goes to it . I removed two 5/32 screws just in front of the tire that hold the splash shield to the fender , carefully flex the shield away from the fender and take a look . I found the vacuum line had come loose , plugged it back on and everything works . Hope this helps
because aaa can jump start it and you can't sounds like maybe the battery cables are curroided (dirty)
in-between the battery post and the clamps, clean the battery terminals and charge your battery as a loose conection can run down even a new battery
×