Re: Bank 2 sensor 2 2005 jeep grand cherokee replace
I seriously don't know where that sensor is located? Banks usually
reffer to the engine ignition coils on the engine, not drive or passenger side, anything. Sorry, I couldn't be of more help.
Good luck.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited to fix second code.
Grand Cherokee P0700 Code Definition
If you are scanning your vehicle right now, you should be looking for a second code that tells you what is actually wrong. Think about it like this.
P0700 Says- "Hey there's something wrong with this transmission.
The Next Code(s) Say- "I'm the actual problem going on with the transmission. I'm what you're looking for."
P0061 Description HO2S Heater Resistance Bank 2 Sensor 3 is the generic definition for the P0061; however your vehicle's manufacturer may have a different definition and information for the P0061 code
If there was a trouble code, the code should tell you which one? bank 1 or bank 2, and or sensor 1 or sensor 2. Bank 1 on a v engine is the bank with number one cylinder. Bank 2 is the other bank. Some sensors are labeled upstream and downstream in relation to the cat, before or after. Upstream is senor 1 and downstream from the cat is sensor 2.
Is it clear as mud?
the bank 1 and 2 refer to what side of the car ir is on. Bank 1 is passenger side bank 2 is drivers side sensor 1 and 2 refer to before and after the catalytic. sensor 1 is before and 2 is after . i hope this helps and just a references if your cam shaft sensor and crank shaft sensor have not gone bad yet i would have them checked. usually these go bad really quick on jeeps. just had to replace both my cam and crank sensors and with out labor it cost around 100 with labor about 150 to 200. and the o2 sensors run anywhere from about 50 to 150 depends on the quality you want
Location
I need to know location driver or passenger side?
What is your question?
×