On my dash board of my 2005 holden rodeo there is a little light that came on yesterday i read the manual and it says that its the service light im trying to find out how to remove the light becuase i service the car my self any help ?

Really the best place. Works instantly,, like within minutes, your work to get manual will be done. And very easry too Complete manuals. You should try from here only!!!!!!!!!!!!!!! 2003 2004 2005 2006 2007 2008 Holden Rodeo Holden Colorado Isuzu Max TF...

drivers side, from bottom, in front of exhaust, will leak oil when undone. take a little time to position some news paper , to channel spilled oil clear of vehicle, it will drip down cross member otherwise.

Is the throttle plate closed all the way? The 4v wide open is a little low and the .6 closed maybe a little high. The wide open should be 4.5 -5 v. Are you reading 5v at the tps plug with the plug unplugged from the tps? Pretty much , what is going in should be close to what wide open should be.

The green wire is always a ground you must ground it

check the dimmer control do the parker lights work

I, feel sorry for you, after reading your problem, but don't worry you visit the Reliable-Store they will help you for sure.
1988 2002 Isuzu Holden Rodeo TF R7 R9 Workshop Repair Service Manual...

4x4 selector box under seat needs re setting,the procedure is on
a web site that escapes me at this time. holden service can do this at approx. $90..

Some times the circuit boards go out that hold the lights try this first. they unscrew from the back of the lights the inserts melt.

2004 holden rodeo 3L ITD. dt P1120. Saying tps fault. Used scan tool to inspect data list an ECU is recieving signal perfect. Goes from 16% to 100%. Double checked TPS output from TPS plug and goes from 0.6v to 4v nice an smoothly. Im suspect on ECU because when i erased code and started engine it revved up to red line by itself but only did once. Any help would be great....

The computer has either turned the service light on based on mileage or there is a malfunction in your engine control system. It does not know (or care) that the vehicle has just been serviced. (computers are not that smart)