Where is the knock sensor at

Did you re-use the flex plate? A cracked or broken one can sometimes sound like a rod knock.

I don't see the knock sensor on the 4.0L engine. --- COMPONENT LOCATIONS Fig. 1: Electronic engine control component locations - 2.5L engine shown
Fig. 2: Overhead view of the (A) automatic idle speed motor, (B) MAP sensor, (C) crankshaft position sensor wiring harness, (D) air temperature sensor, and (E) throttle position sensor - 1992 Cherokee with the 4.0L engine shown
Fig. 3: Electronic engine control component locations - 4.0L engine shown
Fig. 4: Electronic engine control component locations - 5.2L and 5.9L engines (Part 1 of 2)
Fig. 5: Electronic engine control component locations - 5.2L and 5.9L engines (Part 2 of 2)

bump. looking for same answer.

Hello!

Thats the temperature sending unit for the temperature gauge.

try a crankshaft position sensor

replace the switch in the steering column

remove the transmission instead

check to see if you have power going to the light sockets and if you do have power try changing the light sockets . thats what i had to do with my jeep

try checking ur fuses first if that dont work it could be a wiring problem

you can remove the bolts and change the light bulb but some of there have panels on the inside of the car you remove which reveles the wiring to the light grab the end of the wires and turn the plastic peice counter clockwise to revial the bulb