- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
{: ) These triangles you saw is for the Stabilitrak (traction control) indicators. Normally these lights should be off after the engine has started, unless you disable it by pressing the stabilitrak button. Sometimes it lights up automatically when driving under certain road conditions, and will turn off later when normal conditions resume. A wrench beside the triangle indicates a fault is detected on thge traction system and it requires servicing.
What you can try, stop the vehicle, turn ignition off for a few seconds to reset the system, and then restart the vehicle. If the lights wont go off, then tghe vehicle really needed to be checked right away.
{: ) An engine light with wrench indicate a fault in the engine and requires immediate servicing. You should have your vehicle scanned to determine the cause. For your tire light, check first all your tires for proper specifications and recommended pressures. If tires are okay, then they may need to be relearned by a scan tool. I hope the trouble doesn't reach your tire sensors or module. Goodluck.
{: ) The car-inside-triangle symbol is the Stabilitrak indicator and a wrench beside it means that a fault was detected on the Stabilitrak system of your vehicle and need servicing.
Thats the light indicator for your oil change. It is based off of your driving habits, and senses when you should change your oil. You can reset or turn the light off following a basic sequence found in your owenrs manual.
That is the indicator the the vehicle need an oil change, or if the oil was change then the light need to be reset. The way to reset the light is to turn on the key and press the gas pedal 3 times within a few seconds the light should go out, if the oil was change as required.
that sounds like a stabilitrack or traction control light. you may need to take the vehicle into a dealer to get it hooked up to a computer to see what the fault is.
×