The only way to tell why teh engine light is on is to have the engine codes read. Many part stores do it for free. Most shops charge $40 which is well worth it. That's what we charge. Usually it turns off if there is a faulty sensor, or circuit problem,
YOU NEED TO TAKE VECHICLE TO AUTO ZONE THEY WILL SCAN IT FOR FREE.AND TELL YOU WHAT CAUSING CHECK ENGINE LIGHT TO COME ON.AND YOU CAN REPLACE THAT PART.
SOURCE: 1998 Ford Windstar Transmission to 2000 Ford Windstar
while it is possible to perform that swap, the newer 2000+ transmissions will have updated internals and such.
so will it work............. yes.
is it optimal.................no.
SOURCE: service engine light stays on, Why?
Take the vehicle to an auto supply store and have them read the OBDII code(s). This will give you a general idea of where the problem(s) lie.
SOURCE: 1998 Ford Expedition Eddie Bauer SERVICE ENGINE SOON light
Take the vehicle to any local auto parts store that will read the codes. WRITE THEM DOWN, and report back here for further help.
SOURCE: 1998 WINDSTAR CSERVICE ENGINE SOON LIGHT IS ON
it's not likely a bad o2 sensor would cause it to run rough, but the catylitic converter, which is what the o2 sensor reads the flow of, would cause the car to idle and run rough.If you take it to an auto parts store to have a diagnostic test ran on it( most major parts stores will do this for free), thecodes it gets would help pin point it alot better.
259 views
Usually answered in minutes!
×