Question about 2003 Saturn VUE
I am not one hundred percent positive there is one but look near the thermostat housing and see if there is a metal tube coming off of it on the tube you will see a small bleeder screw possibly 8mm. Open the screw and start the car with the heater on high watch for solid water to come out of the screw.
Posted on Oct 03, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 11, 2015 | 2008 Saturn Aura XE
Sep 19, 2011 | 2003 Saturn VUE
Sep 19, 2011 | 2003 Saturn VUE
Could be a Bad radiator Cap? Low Water? Clogged radiator? Not enough air flow, Do To.... Dirty radiator fins? Bad Fan Clutch or Electric fan not running? Timing Off? Stuck closed Thermostat? Bad Water Pump? Blown head Gasket(s)? Cracked Cylinder Head(s), ECT....
Jul 19, 2011 | Saturn Relay Cars & Trucks
Jun 01, 2011 | 2003 Jeep Liberty
Apr 10, 2010 | 1997 Saturn SC
Mar 27, 2010 | 2004 Nissan XTerra
Aug 28, 2009 | 2002 Dodge Intrepid
Fixed problem HERE........................
We changed thermostat, belts, water pump, hoses... you name it we changed it nothing worked. Just before we ordered a new radiator I took a few pics sent them to my dad and instantly he said to remove the bleeder bolt then fill radiator. That's it guys months of overheating a lot of money and hours of work when in the end it was so simple, cost nothing and took 2 mins.
Turns out most the Nissan motors have a type of bleeder bolt or something (not sure what its called exactly) on top of the motor and that should be removed while filling radiator. step 1 wait till engine is cooled down all the way. step 2 remove radiator cap. step 3 remove the bleeder bolt on top of motor (look around for it. Its just a little old bolt all alone) step 4 slowly fill radiator until coolant/water to come out of the bleeder hole. step 5 put bleeder bolt back in. step 6 put radiator cap back on. That's it. Good luck
if you do not do these steps air get caught in the system and when heated turns to steam. and your radiator cant circulate that steam because the hot air raises. The steam will just sit at the top of the motor and block the coolant/water from circulating through the radiator like it should. Without it passing through the radiator correctly it will not cool. Having a new radiator helps because when they installed it they probably filled it correctly (by removing that bleeder bolt). They knew they could have just filled the old one correctly but there isn't any $$$money$$$ in that for them.
Jun 15, 2009 | 2004 Nissan XTerra
91 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: