All my turn signals are out fuse is good hazards and running lights work fine how do i check relay and which one is it? 1997 chevy s-10 4wd

Question edited for a lot more clarity.
Question moved to model category.

It might be the flasher relay and it might be the horn relay although horns tend to seize up through lack of use. the flasher relay is is separate to the Hazards relay which is often part of the switch.

https://www.google.com/search?q=1997+chevy+lumina+flasher+relay+location

Chevrolet Lumina (1997) - fuse box diagram - Auto Genius

https://www.autogenius.info > chevrolet-lumina-1997-f...

Jan 1, 2018 - Fuse, Description. 1, CIGAR LIGHTER - Instrument Panel and Console Cigar Lighter. 4, WAC- WAC Control Assembly Solenoid Box, Mix Motor, ...

Chevrolet Lumina (1995-2001) fuses and relays

https://fuse-box.info > chevrolet > chevrolet-lumina-19...

Here you will find fuse box diagrams of Chevrolet Lumina 1995, 1996, 1997, 1998, 1999, 2000 and 2001, get information about the location of the fuse panels ...

Easiest way though https://www.google.com/search?q=auto+electrician+near+me

..

Question edited for clarity.
Question moved to sub category.

check fuse Stop/Haz Haz. Flasher, Seat Belt Buzzer, Stop Lmps., A.B.S. Memory and the flasher itself.
https://www.google.com/search?q=1992+chevy+suburban+hazard+flasher+location

Fuse Box Diagram Chevrolet Suburban (GMT400; 1993 ...

https://fuse-box.info > chevrolet > chevrolet-suburban-...
Fuse box diagram (location and assignment of electrical fuses and relays) for Chevrolet (Chevy) Suburban (GMT400; 1993, 1994, 1995, 1996, 1997, 1998, 1999)

on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.

Try replacing the flasher.I can't remember if a 97 has a separate hazard flasher or a multifunction type.(my 99 Chevy work truck has a multifunction type-a little black box resembling a relay in the under-dash fuse panel).

brake light dont have relay only fuse brakes are hot at all times on gms. in goes from fuse to brake pedal switch to hazard turn signal switch then to brake lights. ck fuse if good go to pedal switch if good go to turn /hazard switch the turn signal hazard brake all use same wire to lamps.

I would check for voltage at the turn signal switch. The brake lights go thru the turn signal switch, except for the high mount light.

Could be a faulty hazard switch

hi this sounds like the flasher box for the turn signals my be u/s they run on a separate box to the hazards, i think you will find this in your fuse box it should be one of the relays in there, also have you checked the fuse for it as well? hope this helps

Replace the Turn Signal Flasher Relay. It has 2 relays. One for the Hazard lights and one for the Turn Signals. The Turn Signal Flasher Relay is located Front seating area, driver side, passenger side of steering column, under dash, mounted near cigarette lighter. Optional mounting location is under dash, on driver side of steering column. (Curtorsey Auto Zone)

Might be the 'hazard' switch itself?