Question about 1999 Dodge Durango

2 Answers

My 1998 dodge durango a/c does not get could at the front, but the back does.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

Is your climate control or vacuum actuator turn the control from hot to cold,and check for vacuum leak noise i belive the actuator,solenoide or valve whatever they name it is right above you gas pedal is a device with bunch of vacuum little vacuum hoses of different colors like blue,yellow,red etc..... is easy to identify

Posted on Sep 24, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

It can be vent or plenum door that is not operating properly its not sending the cold air to the front but to the back it does so it's the mixture control door

Posted on Sep 24, 2009

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

galdieri46
  • 7 Answers

SOURCE: 1998 Dodge Durango Turns over but wont start

could be Fuel Injectors, are bad ?
all you need is # 1 Fuel Injector, to go out that will not get Fire, and Fuel Mixture to Spark Plug.

Posted on Jun 03, 2009

tcraignfam
  • 30 Answers

SOURCE: 1998 dodge durango how to adjust brake metering block

Odds are that your brake proportioning valve is fine, you should try bleeding the brakes first starting with the farthest wheel away from the brake booster ( passenger rear ) and work your way to the nearest ( driver front). Make sure you have plenty of fluid and that your brakes are in good shape before hand.

Posted on Dec 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What years interchange with a 1999 dodge durango driver's side doors


William, 1999 Dodge Durango, years for drivers door interchange are 1998 to 2000. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Aftermarket Dodge Durango Hood Door Fender Grille Etc Prices Reviews News...
How to Remove Replace Front Door Panel 99 Durango 98 03
https://answers.yahoo.com/question/index?qid=20100413095252AADPNfw

Jun 04, 2016 | 1999 Dodge Durango

Tip

Dodge Durango Won't Start, Turns over, NO BUS on instrument cluster


1998 - 1999 Dodge Durango 3.9L
2000 - 2001 Dodge Durango 4.7L
1998 - 2000 Dodge Durango 5.2L
1998 - 2001 Dodge Durango 5.9L

The PCM has 3 connectors plugged into it. Try wiggling each connector and listen for a clicking sound, starting with the connector furthest from the front of the Durango, and the middle connector with a white top.

If this doesn't help, replace your PCM. The PCM (power control module) can get hot, causing a short or broken circuit inside the module. Replacing the module will fix the problem. If your truck dies randomly when it's hot outside, but will start back up after it cools down, this is probably the problem.

on Jun 18, 2010 | Dodge Durango Cars & Trucks

1 Answer

Wiring for 1998 dodge durango car stereo


Hi there:Check this on 1998 Dodge Durango Car Audio Wiring Diagram:

Car Radio Battery Constant 12v+ Wire: Red/BlueCar Radio Accessory Switched 12v+ Wire: Red/WhiteCar Radio Ground Wire: N/ACar Radio Illumination Wire: Black/YellowCar Stereo Dimmer Wire: OrangeCar Stereo Antenna Trigger Wire: N/ACar Stereo Amp Trigger Wire: GreenCar Stereo Amplifier Location: N/ACar Audio Front Speakers Size: 6 1/2" SpeakersCar Audio Front Speakers Location: DoorsLeft Front Speaker Positive Wire (+): Dark GreenLeft Front Speaker Negative Wire (-): Brown/RedRight Front Speaker Positive Wire (+): Brown/YellowRight Front Speaker Negative Wire (-): Brown/Light BlueCar Audio Rear Speakers Size: 6 1/2" SpeakersCar Audio Rear Speakers Location: Rear DoorsLeft Rear Speaker Positive Wire (+): WhiteLeft Rear Speaker Negative Wire (-): Dark Blue/RedRight Rear Speaker Positive Wire (+): Brown/WhiteRight Rear Speaker Negative Wire (-): Brown/Orange
Hope helps.

Sep 05, 2010 | 1998 Dodge Durango

1 Answer

Firing order of 98 durango with a 5.2L


For the 1998 Dodge Durango 5.2L V8:

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
..........(back)
_____..........._____
|...8...|..........|...7...|
|...6...|..........|...5...|
|...4...|..........|...3...|
|...2...|..........|...1...|
..........(front)

Distributor:
........(back)
............3
....4..............6...
.......................(+)-screw: rounded-end of Cap
8......................5
(+)-screw: square end of Cap
.....1...............7
..............2
.........(front)

Rotation: Clockwise

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!


Apr 09, 2010 | 1998 Dodge Durango

1 Answer

Location of oil sending unit on 1998 dodge durango


look by the oil filter on the right side of the engine, easy to see with right front tire off.

Jan 15, 2010 | 1998 Dodge Durango

1 Answer

1998 dodge durango how to adjust brake metering block to give more fluid to back brakes?


Odds are that your brake proportioning valve is fine, you should try bleeding the brakes first starting with the farthest wheel away from the brake booster ( passenger rear ) and work your way to the nearest ( driver front). Make sure you have plenty of fluid and that your brakes are in good shape before hand.

Dec 13, 2009 | 1998 Dodge Durango

1 Answer

1998 dodge durango slt compressor keeps on turning off and on


THE IS CAUSED BY THE SYSTEM BEING LOW ON REFRIDGRENT, THIS IS CAUSED BY A LEAK, MOST COMMON CAUSE OF THE LEAK IS THE FRONT SEAL OF THE AC COMPRESSOR.

Jul 24, 2009 | 1998 Dodge Durango

1 Answer

98 dodge durango front brakes calioers wont compress decompress


YOU NEED TO REPLACE THE PROPORTIONING VALVE!!
DOES IT HAVE ABS BRAKES ON THE FRONT? (MOST DURANGOS ONLY HAVE ABS ON REAR ONLY)

Jun 30, 2009 | 1998 Dodge Durango

1 Answer

1998 Dodge Durango Turn signals went out one at a time


it sounds like a pinched wire is it in the front or back but also check to make sure the bulb is pushed in all the way. Please rate my response thank you very much . if you have any more ? just let me know

Jan 28, 2009 | 1998 Dodge Durango

Not finding what you are looking for?
1999 Dodge Durango Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...