Replaced with new compressor & clutch but get no voltage to clutch. How to trace circuit?
Do you have freon in it yet,it will not have voltage untill freon in it because of the low preasure switch, because it trying to protect your compressor,even if you have some it may not be enough,I hope this helps you
You should have a high pressure switch and a low pressure switch on the system, both should be mounted in a line or on the compressor itself. If you unplug them and jump them with paper clips for a few seconds to see if the compressor comes on. If it does then either the switch is bad or the system is low on charge. Also check the A/C fuse and relay under the hood.
97 views
Usually answered in minutes!
×