Where is my rear wheel sensor located on my 2002 ford explorer xlt

SOURCE: Rear Axle Bearing

i know for a fact that the bearing comes with the hub., and if the old bearing is badly damage you may need to heat it to remove it from the axel...so this may be a rather big job if your not equipt
with torch or other ...

SOURCE: replace rear wheel bearing 2002 ford explorer 4x4

you must remove brakes, then remove axle nut, then remove upper control arm and finally tie rod stabilizer, remove axle from car then bearing can be accessed. this is a difficult job that requires special tools so be careful

SOURCE: 2002 ford explorer xlt 4x4... Vehicle won't start

My 2002 Ford Explorer have the same problem

SOURCE: free fuse box diagram for ford explorer 2002 XLT

Heres the definitions of the fuse numbers:

SOURCE: replace rear wiper arm

there is a cover at the base lift it up and then you have a nut. 10mm remove this and pull off the arm. sometime they get stuck and you will have to pry it up.