Hello what is the proper processure to remove shift cable on a 1997 Oldsmobile bravada

SOURCE: 1997 oldsmobile bravada electonics gone crazy

been raining there?... check battery grounds and all main wiring you can find for poor ground connections...good luck

SOURCE: 97 bravada steering pump leak

you need to get a special power steering pump pulley removal tool. you can rent it from orielly auto parts for about thirty bucks

SOURCE: 1997 oldsmobile bravada making clunking

the vehicle has to be put on a hoist. turn the driveshaft that goes to the rear wheels,it is driven by a transfer case that is almost in the middle of the vehicle,just rearward of the transmission.
if the noise comes from the transfer case,then that is the problem.
the drive shafts for the rear have universal joints which can develop play and give the same clunk.
if it is the transfer case,it needs to have a gear replaced.
always warm up the vehicle for enough time for the engine to come down to 1000rpm before putting in drive,the fast idle is over 2000rpm,and puts alot of stress on the drive components,and over time wear them prematurely.

SOURCE: where is the fuel pressure regulator on a 1997

it is located on the fuel rail on top the engine

SOURCE: Need infor for Oldsmobile Bravada 300 SUV R&R front differential

This is a HUGE job that will require mechanical skills and a goo repair manual. This question can not be answered in it's entirety in this post.