Programing can only be done once for the life of the module. A new BCM is not programmed. Before the system will function properly it must be programmed to the code that matches the keys.
I had not heard of rebuilt BCMs and I would be cautious about buying one. The BCM can only be programmed once (when new) so I would be curious how a rebuilder could get around that.
SOURCE: 2003 Hyundia Tiburon BCM
http://www.newtiburon.com/forums/showthread.php?t=102241&highlight=bcm
SOURCE: try to locate body control module on a 94 buick park ave
BCM --The Body Control Module is located on the right side of the vehicle and positioned under the instrument panel. In order to gain access to the module, it will be necessary to first remove the trim panel.
SOURCE: body control module for 2003 saturn l300
the body control module or BCM is located on top of the inside of the glove box,remove the lower trim panel under the passenger foot well under the glove box,the the 4 screws that hold the glove box door on,,,then the screws that hold the box to the dash and the BCM is slid into the top of the box,,,,,,you are gonna need it programmed as it comes new blank,and the car will not start with out a program
SOURCE: Body Control Module
Below the instrument panel on the left side henge pillar,or up high behind the Instrument panel depending the model and options!
604 views
Usually answered in minutes!
×