Where is the water temp.sending unit on a v6,1998 mercury sable
The second picture down on the left .copy and paste the below site.
https://www.google.com/search?q=1998+mercury+sable+temp+sender+location&client=ms-android-americamovil-us&prmd=sivn&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiu9bev5sjVAhUExoMKHUzIDdcQ_AUIEigC&biw=360&bih=513#imgrc=byCw3mkwV_fgOM:
SOURCE: 1998 mercury sable, VIN 1MEFM53S9WG612687. Acc Belt/Pully system
Yes, the harmonic balancer is broken. It is what the crank pulley is bolted to.
SOURCE: Normal coolant temp for 2003 Jeep Grand Cherokee city/highway V6
U should have the accuracy of the gauge tested before u spend any more money on this, factory gauges are not very accurate. U are still in the normal zone though no matter what the other expert says, and jeep Cherokee's run hotter than 195 due to how small the engine bay is, my friend and fellow tech works for a jeep dealer and says hot running on V6's and overheating esp on the V8's is a common issue even on new trucks.
SOURCE: oil sending unit on 2004 chrysler sebring V6
Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove
SOURCE: fuel pump relay location on 98 mercury sable
its under the hood on driver side what the problem not starting check the trunk area for the fuel cut off switch poss bad or tripped did u get hit or someone bump ur car
91 views
Usually answered in minutes!
×