What type of clutch does my 1997 mazda protege, 5 speed manual transmission have? Is it a centrifical clutch, or a hydrologic clutch?

SOURCE: where is drain plug for transmission on 1997 mazda protege

normally you have to take all the bolts off from around the pan and you can try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

SOURCE: Need confirmation that 5 Speed Transmission out 1993 Mazda Protege SOHC 1.8 liter Will Bolt up to the Same L-4 Block Engine /Mounts in the 1990 Mazda Protege LX 1.8 liter DOHC

try calling a junkyard and see if they will tell you the enterchange ok good luck

SOURCE: transmission

Hey i just had the same problem with my car. the 3rd gear shift fork was broke off in the transmission in my car. however it might just be ur shift linkage. you can check to make sure the pin is moving in and out of the tranny from underneath the car (laying on the ground its on the left side just before the echaust bends to go up to the headers.) and if it is moving it most likely is the shift fork.
But after i had my transmission done my factory keyless entry, interior lights, and headlight door buzzer (when u get out of the car with the lights on) does not work.... also my odometer trip meter resets itself everytime i shut my car off. im still working on finding out what that is.

SOURCE: Where is the Clutch Slave Cylinder located on a

left of master cly

SOURCE: my 1994 mazda protege xl won't change into 2-5

sound's like the throw out bearing wen't this it what move's the clutch away from the flywheel when u push in the clutch peday if this fai's the tranny could be fine but u will have to remove the tanny to replace the throw out bearing and clutch asembaly