Did you remove ALL rust on the wheel hub face
& put anti-seize on it & both sides of the rotor, as well
as the ends of the pads & slippers or sliding surfaces
Did you clean the caliper bushings & pins/bolts & use
the synthetic brake lube on them
Did you flush all 4 corners (bleed)
Did you check for Enhanced OBD Codes with professional
scanner in ABS Module?
No idea what vehicle your have
So are any front end parts worn/loose/etc
Brake Flex Hoses to calipers, collapsed inside, & caliper
fails to release?
Loose or Broken ABS Sensor or tone ring/wheel,if it applies?
Beat me to it---- Check the inner tie rods for play or loose steering rack mounts
×
What make and model of auto are we working on? If you changed the rotors and pads, then the problem maybe in the tie rod end or a tire the cords have slipped on. Have someone move the steering wheel from side to side just enough to to make the slack out of the steering without moving the wheels to see if there is any movement in the tierods
SOURCE: abs light on changed discs and pads
i get the same issue,my solution is to change the abs ring about a fiver on ebay
62 views
Usually answered in minutes!
×