2006 Chrysler PT Cruiser Logo
A
Anonymous Posted on Aug 10, 2014

What is the underlying problem that will short out a window motor in a '06 PT CRUISER

1 Answer

A

Anonymous

Doubt anything is shorted out

If your saying-- the motor failed internally-- because
you have it out in your hand & powered it up & got nothing,
replace it

5 Related Answers

Anonymous

  • 512 Answers
  • Posted on Jan 05, 2009

SOURCE: 01 PT Cruiser window won't go up Can hear motor

sounds like he broke the regulator and it will need replaced

Ad

Anonymous

  • 2559 Answers
  • Posted on Feb 08, 2009

SOURCE: 2004 chrysler pt cruiser starter motor removal

You may sneak it out with small fingers with out pulling out the starter.

If starter removal is required,Just unhook the battery cables,Remove the 2 bolts holding the starter on.


Please rate this a fixya

Anonymous

  • 6 Answers
  • Posted on Apr 01, 2009

SOURCE: i have a 06 pt cruiser the battery light came on

there is a tsb on that in the dealerships i belive there is a flsh for the computer to fix this problem i have been a mechanic at a chrysler dealership for 9 years now and that is a pretty common problem

martin538

steven martin

  • 117 Answers
  • Posted on Apr 07, 2009

SOURCE: Engine motor mounts on 2001 PT Cruiser

Place a block of wood under the engine sump to prevent damage when you jack up the engine to take the tension off the mount. Make sure you do not jack the engine up too much as you might damage the exhaust,cooling hoses etc.

Anonymous

  • 5 Answers
  • Posted on May 26, 2010

SOURCE: 2001 PT Cruiser: How too remove crankshaft pulley 2001 PT Cruiser...

GET A 3 SPOKE PULLEY EXTRACTOR AND SCREW IN THE BOLT BUT IN THE CRANKSHAFT HOLE PUT A MUCH SMALLER SCEW SO YOU WOUNT MESS THE INSIDE UP

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 06 pt base would start then die, then run a couple days later same thing, now no tail lights work cause there fried to, if the ground going from batt to motor is fried and i replaced it what next

Sounds like a possible regulator problem if your light bulbs are actually burnt out.
The regulator is usually built into the alternator.
If you were getting overvoltage, then it could have fried many things. But the ground going from battery to motor seems almost unbelievable. That would definitely point to the alternator being shorted. It may have destroyed the battery too.
You'll be lucky if it didn't blow some fuses or destroy a computer in the PT.
0helpful
1answer

I have an 06 pt cruiser when I bought it couldn't open door from inside. Suddenly door opens from inside and window won't come down what's the problem

Tests/Procedures: 1. Check the power and ground at the master switch mount in the dash. Pin 12 is power at key on and pin 4 is the ground.

2. Next try driving the left front window by applying power to pins 13 and 14, switch polarity should drive the window up and down. If not, check for broken wires in the between "A" pillar and the door, then gain access to the window motor and try applying right at the motor.
Tests/Procedures: 1. Check the outside door handle switch. It should ground the Orange/Yellow wire when the handle is raised. Tech Tips: The power window should drop slightly whenever the door is opened. The ensures a tighter seal to the convertible top.
0helpful
1answer
0helpful
2answers

Pt cruiser stalling

check loose main connections
0helpful
2answers

06 PT cruiser rear wiper stopped working and I can not find fuse box where exactly is it

the fuse box is under the hood basically behind the battery but if the power windows are workng the fuse is good.you may have a wiring problem or a bad motor
0helpful
1answer

Pt cruiser radio dash problem

i believe the window swith is between the two vents....you have to carefully pry that off first then you will have to disconnect the window switch from the harness.....then pull all they climate control knobs off and gently pull all around the trim and you should have it off.
0helpful
1answer
Not finding what you are looking for?

74 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...