2001 Hyundai Trajet Logo

Related Topics:

A
Anonymous Posted on Aug 04, 2014

Replace crankshaft sensor Hyundai trajet - 2001 Hyundai Trajet

4 Related Answers

Anonymous

  • 776 Answers
  • Posted on Jun 28, 2009

SOURCE: 2001 trajet. automatic box output speed sensor

Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.

Ad

Anonymous

  • 1071 Answers
  • Posted on Aug 29, 2009

SOURCE: its a hyundai trajet,aa said crankshaft sensor not

it is inside the timing cover in most cases with hyundai the timing belt will have to be removed so the crank gear can come off the sensor is usually behind the gear especially if it is a 6cyl if it is a 4 cyl then the wire goes behind the timing belt make sure the timing marks are lined up so when you reassemble it is lined up

Testimonial: "Thank you for the advices Ill get cracking on it"

Anonymous

  • 224 Answers
  • Posted on Aug 31, 2009

SOURCE: hi,do you know if there is more than 1 sensor on a

camshaft position sensor and one crankshaft position sensor

Anonymous

  • 224 Answers
  • Posted on Aug 31, 2009

SOURCE: Hi, can some one please tell me if there are more

take to autozone let them check for codes no charge for this

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where can I locate the crankshaft position sensor on a 2000 hyundai trajet? Thank you

Those sensors are usually located somewhere near the actual crankshaft pulley. You might need to remove the covers over the timing belt to get to it. The photo below is only a guide for general appearance and position.
821c60f2-caf0-4b39-80a3-91fe68cf5047-vu1ysdwewazirbzn3njmdcla-5-0.jpeg
0helpful
1answer

Why my hyonda trajet refuse to start, had electrical problems

have the OBD codes read as this will tell you what sensor/switch etc could be causing the problem
0helpful
1answer

I have a 2001 hyundai elantra that has a error code of U0D00 what is the explanation?

Go to this URL: http://www.hyundai-forums.com/138-trajet-forum/89493-trajet-error-code-u0d00.html

It appears that another Hyundai owner had the same problem and sorted it out himself. U0D00 seems to be the Mass Airflow meter (sensor). Replace it and see how it performs. Good luck.
0helpful
1answer
3helpful
2answers

The engine stops running after 10 minutes of driving

could be a bad crank sensor, a bad crank sensor will let car run for a while then shut down and will not start for 10 to 15 min. and it will repeat this cycle if not fixed.the crankshaft position sensor provides the ignition module and pcm with a crankshaft position signal. the module uses this signal to determine spark for each cylinder. the pcm uses this signal for proper timing of engine.
4helpful
1answer

Its a Hyundai trajet,AA said crankshaft sensor not working,can not find any mention of it in work shop manual

it is inside the timing cover in most cases with hyundai the timing belt will have to be removed so the crank gear can come off the sensor is usually behind the gear especially if it is a 6cyl if it is a 4 cyl then the wire goes behind the timing belt make sure the timing marks are lined up so when you reassemble it is lined up
0helpful
1answer

2001 trajet. automatic box output speed sensor

Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.
Not finding what you are looking for?

253 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...