How to fix tune/sel knob on dashboard

Question edited for clarity.
Question moved to model category.

Suzuki Grand Vitara 2003 Manuals - ManualsLib

https://www.manualslib.com > ... > Automobile
Manuals and User Guides for Suzuki Grand Vitara 2003. We have 2 Suzuki Grand Vitara 2003 manuals available for free PDF download: Service Manual, Manual ; Table ...

could be a loose wire to the back of that speaker

1. Connect the FM antenna and the AM loopantenna at the back of the unit. Rotate the AM loop for better reception.
2. Press AM/FM.
3. Tune a station by pressing TUNER+/-repeatedly until the desired station is found.Alternatively, you can press and hold thesame buttons down for about one second toactivate the automatic search function. Inthis mode the unit will automatically tunefrequencies until it finds a station.
4. Repeat step 3 to tune to another radio station.
5. Press AM/FMto select between FM and AM.Storing Radio Stations

The unit can store up to 40 radio stations (30 preset stations for FM and 10 preset stations for AM) in its memory. You can enter every single radio station yourself or the unit can store all available radio stations automatically in ascending order

Automatic Preset Programming
1. Press AM/FM to enter the AM/FM mode.
2. Press and hold AM/FM for two seconds to start automatic preset programming.
3. Radio frequencies will be browsed and radiostations stored automatically. When all the available radio stations are stored or all 40(30 preset stations for FM and 10 preset stations for AM) memory locations are full,the auto preset programming function will stop.

Manual Preset
1. Tune to a radio station (see "Manual tuning"for details).
2. Press MEMORY. While the Program Preset number is still flashing, input your desired preset number using the numeric buttons or press CH+/-, then press MEMORY to store it.

Retrieving Preset Stations
1. Press AM/FM to enter the Tuner mode.
2. Press CH +/- to search up or down for thepreset stations or directly press the numeric buttons.

cuts out ?
well, all FM radios cut out for.:
1: weak station.
2: stereo can not be held in properly( can be bypassed on most RAD , pick mono)
3: AGC drop out, same as #1

on better radios (RTM) you can defeat these default features.
set the FM to mono channel mode, and now you hear all stations.
also kill the AGC mode. this allows you to hear
the station. and static or both. like a Marconi radio of days of old.
modern radios are programmed to blank weak stations.
tis a fact. im a tech and tuned these features, for 50 years.

ok the fix,
1: move closer to station
2: get a better antenna (vast choices)
3: go to station and turn the gain knob up and get arrested by FCC.

How to set your clock stereo on 1992 Dodge Dakota

?Turn the vehicle on then push the SEL button. It should flash back and forth between the time and the radio station you are set to. Set it to the time position.
?Now push the SET button. On my original stereo a P comes up. ( I think the P means p.m. but I have not been able to figure out how to change that setting) Next try the SEL button. It should flash to the hour. Use the TUNE knob to scroll to the desired hour.
?Push the SEL button and you should be able to set the desired minutes the same way.
?Push the SEL button again and the clock on your vehicle stereo should be set.

1. Press the TUNE/SEL knob to enter the main menu
2. Turn the TUNE/SEL knob until set clock appears on the display
3. Press the TUNE/SEL knob to select set clock
4. Turn the TUNE/SEL knob to adjust the time
5. Press the TUNE/SEL knob to update the time.Time updated will appear on the display

Thank you for using Fixya and good luck.

Use the preset buttons to enter the five-digit code (I assume that you have that; if not, see below). When it is entered correctly, the radio will start playing.
If your vehicle is equipped with a navigation system, press and release the TUNE knob; the number ‘‘0’’ appears on the display.
If ‘‘0’’ is the first digit in your code, press and release the TUNE knob to store it.
If ‘‘0’’ is not the first digit in your code, turn the TUNE knob left or right until the first digit is displayed.
Press and release the TUNE knob to store it. Enter the remaining digits the same way.
If you make a mistake entering the code, do not start over; complete the five-digit sequence, then enter the correct code. You have 10 tries to enter the correct code. If you are unsuccessful in 10 attempts, you must then leave the system on for 1 hour before trying again.
If you don’t have the code, a dealer can access your code with your radio’s serial number. To access the serial number, turn the radio on. It must display ‘‘CODE’’, then turn the radio off. Push the preset 1, preset 6, and power buttons at the same time, then quickly release.
Hope this helps you.

To de-program the RKE fob from the 1st truck ( the 1998 one ? ), enter programming mode. I had to try 3 times on my 2001 to enter programming mode, and thought I did it the same each time, obviously I did not, so do not give up if you do not enter programming mode the 1st time.

Once you enter programming mode ( locks cycle ) wait 30 seconds, and programming mode should exit. Entering programming mode for the RKE fobs erases all previous RKE fobs.

This should cure the problem with the RKE fobs being programmed to 2 different trucks.

The RKE ( Remote Keyfob Entry ) is not a security feature, just a convenience item, so you are not disabling any actual security item.

Clock set:

To adjust the clock, press the tune knob for longer than 1.5 seconds. A beep signals entry into the clock adjustment mode and
CL appears in the display. The hours will be blinking. Rotate the tune knob to adjust the hours to the desired level.

Press the tune knob a second time and the minutes will start to blink. Rotate the tune knob to adjust the minutes to the
desired level. After 10 seconds, the radio or CD display will reappear. Once the clock is set to the desired level, press the knob repeatedly until the radio or CD display reappears.

All done!

with radio on depress the set button and "p" will be displayed within 5 sec. depress the sel button and hours and a flashing colon will be displayed, rotate the tuning knob clockwise to change depress sel button todisplay minutes, and make the setting the same way