2008 Kia Sportage 2.0 Logo
R
RON CROWE Posted on Apr 10, 2014
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

4wd indicator light comes on while driving

When giving gas four wheel drive light comes on and stays on til shut car off when restart light is out til start driving back on again

1 Answer

Silas Lawrence

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Kia Master 906 Answers
  • Posted on Dec 19, 2014
Silas Lawrence
Kia Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Dec 18, 2014
Answers
906
Questions
1
Helped
182001
Points
2158

Something is engaging the 4x4 on you. Check the vacuum hoses the wiring to the T case for shorts.

5 Related Answers

Anonymous

  • 3 Answers
  • Posted on Jan 17, 2009

SOURCE: 2001 kia sportage 4wd

replace vacuum hoses they are located just out side shock towers front end

Ad

Anonymous

  • 1 Answer
  • Posted on Mar 06, 2009

SOURCE: four wheel drive wont engage

I fought with this problem every year since I had the Sportage. And it was so frustrating to find out just when you really needed it, that you did not have 4-wheel drive. I replaced the hubs with manual hubs and I wish I would have done it at the beginning. They work great and are 100% reliable. Bottom line.. the vacuum hubs were a great idea that just plain did not work reliably. Save yourself alot of grief and money and just replace the hubs. Less than $200 including paying someone to put then on and I now can rely on my Sportage when I need it.

Anonymous

  • 1 Answer
  • Posted on Mar 12, 2009

SOURCE: 04 Kia Sorento stuck in 4WD Low

The 1st time my 04 Sorento got stuck in 4WD low it was towed to dealership & they claimed it was the switch. Six months later, while on a camping trip, got stuck again. The local tow truck driver saved me hundreds of dollars in towing costs. Put it in reverse for at least 10-20 feet. That's it! He said that he found this to be a common problem. I later asked my dealership why they failed to mention this solution to me. They replied that they thought I knew! Spread to word!

Anonymous

  • 46 Answers
  • Posted on Jan 31, 2010

SOURCE: I have a 2000 Kia Sportage 4 wheel drive that cuts at half tank

yes they are similar. you would have to pull the tank out to fix this problem

Anonymous

  • 31 Answers
  • Posted on Mar 08, 2010

SOURCE: 2003 kia sportage 2l wont engage four wheel drive

This is a long/hard one to answer as a few things can cause this. First, check the vacuum lines running from the engine down to the front axles for cracks, and make sure you have vacuum to the axle hub. Second, remove and inspect the front wheel bearings, they should be set to proper preload and there should be no signs of water in the hub. And last if there is water in the hub, that most likely means there is rust on the front axle, and the pitting caused by the rust will not allow vacuum to build up and ingage the four wheel drive. the later requires a new front hub kit $$$.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

When I turned my 2007 toyota tundra off, the 4 wd was working. When I started it again the 4 wd wouldn't engage and the light started blinking.

first time used 4WD on this car?????
what transfer case is there,? key fact #1 not told
JF1A<<< my guess this.
NOT TOLD YOU WHAT THE TIRES ARE ROLLING ON
PAVEMENT, DIRT, OFF-ROAD.. ICE, SNOW OR WHAT.
THE CAR IS NOT AWD
THE CAR IS NOT FULL TIME 4WD
IT IS PART TIME 4WD.
THE USERS MANUAL TOLD YOU THIS


Four?wheeldrive models-Toyota rec-
ommends not using four?wheel drive on
dry hard?surfaced roads, because four?
wheel driving wil l cause unnecessary
noise and wear,and poor fuel econo-
my.

WHAT HAPPENS IS DAMAGE TO THE TRANSER CASE MAIN CHAIN OR FAR FAR WORSE.
or
google
"what part time 4 wheel drive means."
it means there is no center Differential to have AWD

SAME GUIDE SAID

Four?wheel DriveSystemWarning
Buzzer(four?wheel drive models)
This buzzer reminds you that the transfer
mode is not selected correctly.
If the buzzer sounds when you shift the
transfer from "2 WD" to "4H", "4L" to "4H",
"4H"to "4L",or"4L"to "2WD"mode,follow the instructions in"Four?wheel drive
system"on page 239 in Section 1?7.

TO EXIT 4WD, IF SELECTED INCORRECTLY ON DRY PAVEMENT.
GET 1 TIRE OF THE TRUCK ON LOSE DIRT ,GRAVEL ,GRASS. AND SHIFT TO 2WD.
AND STAY OUT OF 4WD UNTIL LEARN HOW PART TIME WORKS.,

4WD IS FOR
DIRT
FOR ICED OVER WHAT EVER.
FOR PACKED SNOW OR DRIFTS.

NOT FOR DRY PAVEMENT AT ALL. OR EVEN WET
1helpful
1answer

Hummer H2 4wd service light comes on when I start the H2

If the 4WD service light comes on when you start your Hummer H2, it could indicate a problem with the four-wheel drive system. This warning light could indicate a problem with the transfer case, the drive shaft, the front or rear differential, or other components of the 4WD system.
It is recommended to take your vehicle to a certified mechanic or a Hummer dealership for proper diagnosis and repair. The service light coming on could be a sign of a serious problem, and it is important to address it promptly to avoid further damage to your vehicle and ensure safe operation.
0helpful
1answer

2008 trailblazer 4wd inop

Does yours have The Selectable Four Wheel Drive (S4WD) Front Axle or
Automatic Four Wheel Drive (A4WD) Front Axle is
The SERVICE 4WD indicator lit ? do you have any other lights lit ?
anything like this happen Transfer Case Shift Control Switch Indicator Flashes, then Returns to Previous Mode ? Your going to need to take it to a repair shop , have scan tool hooked up an check for codes in the BCM an all the modules !
0helpful
1answer

Fwd lights always on jeep compass

try it in dirt yet (gravel, sand, grass dirt)
since you didnt post transfer case type can't answer
if you use , part time 4wd on dry pavement this will happen as
will 4low or lock. read the operators guide, one more time.

its a new car get it serviced, or drive in dirt, and turn off 4wd
see if it stays off. if you use the car wrong, the dealer will just stare at you, in a very not so funny way.

new cars come with options, or by sub model, (same really)
some have Automatic Full-Time Four-Wheel Drive
which one?
The Compass also features two electronically controlled four-wheel drive systems. Freedom Drive I and Freedom Drive II, Freedom Drive I is a full-time four-wheel drive system with locking capabilities

if some one used LOCK
you need to unluck in dirt. drive to side of road with gravel
or any loose surface and get bad to normal.
read opeators guide 1 more time.....

0helpful
1answer

My 99 expedition won't stay out of all wheel drive I changed the transfer case motor and now it stays I awd for about 10 minute then kicks back out and then the 4x4 light flashes and then it is ok until...

The 4X4 system on your vehicle is computer controlled , GEM module . generic electronic module . The four wheel drive mode switch is a low voltage input to the GEM module . The GEM energizes relay's to control the mode as depicted by input from the mode switch an torque on demand relay an someother inputs . Probably has DTC - diagnostic trouble codes stored in the GEM module .
Transfer Case -Automatic Four-Wheel Drive (A4WD) The automatic 4-wheel drive transfer case system consists of the following:
  • automatic 4WD indicator light
  • brake pedal position (BPP) switch
  • torque on demand (TOD) relay
  • front output shaft speed sensor
  • generic electronic module (GEM)
  • 4WD high indicator light
  • 4WD low indicator light
  • 4WD mode switch
  • rear output shaft speed sensor
  • shift position sensor
  • throttle position output (TPO) from the powertrain control module (PCM)
  • transmission range sensor P1804 Transmission 4-Wheel Drive High Indicator Circuit Failure GEM REFER to Section 413-01 . P1806 Transmission 4-Wheel Drive High Indicator Short Circuit to Battery GEM REFER to Section 413-01 . P1812 Transmission 4-Wheel Drive Mode Select Circuit Failure GEM REFER to the Symptom Chart. P1815 Transmission 4-Wheel Drive Mode Select Short Circuit to Ground GEM GO to Pinpoint Test C . P1820 Transmission Transfer Case Clockwise Shift Relay Coil Circuit Failure GEM GO to Pinpoint Test B . P1822 Transmission Transfer Case Clockwise Shift Relay Coil Short Circuit to Battery GEM GO to Pinpoint Test B . P1824 Transmission 4-Wheel Drive Clutch Relay Circuit Failure GEM GO to Pinpoint Test A . P1826 Transmission 4-Wheel Drive Low Clutch Relay Circuit to Battery GEM GO to Pinpoint Test A . P1828 Transmission Transfer Case Counter Clockwise Shift Relay Coil Circuit Failure GEM GO to Pinpoint Test B . P1830 Transmission Transfer Case Counter Clockwise Shift Relay Coil Short Circuit to Battery GEM GO to Pinpoint Test B . P1836 Transmission Transfer Case Front Shaft Speed Sensor Circuit Failure GEM GO to Pinpoint Test A . P1837 Transmission Transfer Case Rear Shaft Speed Sensor Circuit Failure GEM GO to Pinpoint Test A . P1838 Transmission Transfer Case Shift Motor Circuit Failure GEM REFER to the Symptom Chart. P1846 Transmission Transfer Case Contact Plate 'A' Circuit Failure GEM REFER to the Symptom Chart. P1850 Transmission Transfer Case Contact Plate 'B' Circuit Failure GEM REFER to the Symptom Chart. P1854 Transmission Transfer Case Contact Plate 'C' Circuit Failure GEM REFER to the Symptom Chart. P1858 Transmission Transfer Case Contact Plate 'D' Circuit Failure GEM REFER to the Symptom Chart. P1866 Transmission Transfer Case System Concern - Servicing Required GEM REFER to the Symptom Chart. P1867 Transmission Transfer Case Contact Plate General Circuit Failure GEM REFER to the Symptom Chart. P1874 Transmission Automatic Hall Effect Sensor Power Circuit Failure GEM GO to Pinpoint Test A . P1875 Transmission Automatic Hall Effect Sensor Power Circuit Short to Battery GEM REFER to the Symptom Chart. P1891 Transmission Transfer Case Contact Plate Ground Return Open Circuit GEM REFER to the Symptom Chart. P1892 Trans. Automatic 4-Wheel Drive 4X4 Mechanical Lock Output Circuit Failure GEM GO to Pinpoint Test B . P1893 Trans. Auto. 4-Wheel Drive 4X4 Mechanical Lock Output Short to Battery GEM GO to Pinpoint Test B .
  • Your best bet , take it to a qualified repair shop .
1helpful
1answer

MY 4x4 on my excursion is stuck and does not want to come off how do i get it to come of and back to 2w drive?

Without the ability to diagnose the problem further, obvious things need to be eliminated. First step, with engine running and foot on brake, shift transmission to neutral. Then slowly turn Four Wheel Drive (4WD) selector knob out of 4WD Low to 4WD High, and then finally to 2 Wheel Drive. "4x4" and "LOW RANGE" indicator lights on the instrument panel should no longer be illuminated. If this does not work, you should visit FixYa for further help or take it to the shop for proper diagnosis. Hopefully, this will help you to FixYa problem!
0helpful
1answer

2005 gmc sierra. Manual shift 4wd. After using

When you are finished with your 4 wheel drive,put the transmission in neutral, disengage 4 wheel drive and shift to reverse then back up a couple feet before shifting to forward gear.
0helpful
1answer

1994 Chevrolet S-10 Blazer, not going in to Four Wheel Drive.

could be a bad 4wd actuator or solenoid- those arent terribly expensive to fix- but a bad transfer case is expensive. either way id recommend putting it in the shop if you need 4wd


0helpful
1answer

03 Trailblazer service 4 wheel light activates while turning

check the lubricant in the transaxle, if it is low it will cause the light to come on.
0helpful
2answers

4 wheel drive doesnt work.

Has this Jeep been modified at all?
It sounds like the shifter cable was reinstalled backwards.
Specifically the 4-Low "Not Climbing Well". 4-Low should give you the best torque and hill climbing ability.
Do you feel any "Binding" in the steering wheel (difficult to turn)?
Remember a Jeep uses real driveshafts and differentials to give you 4WD - you cannot engage 4WD or 4-Low on dry hard surfaces. It needs a little bit of slip between the wheels for turns.
Check you're fluids too.
Not finding what you are looking for?

1,550 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...