Question about 1991 Chevrolet S-10

1 Answer

Chevy s10 fuse box diagram

Will start by pouring gas in throttle body,then stall,will not fire up.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Chevrolet Expert
  • 495 Answers

Then you have a fuel delivery issue...Verify fuel pump operation

Posted on May 08, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: 99 chevy blazer wont stay running

there is a lttle type of valve filter in the gas line the size of a spark plug, i had same problem.

Posted on Sep 17, 2008

  • 1 Answer

SOURCE: 1999 CHEVY WONT START

i had th same problem and what fixed my problem was the regulator

Posted on Nov 04, 2008

  • 124 Answers

SOURCE: 98 chevy s-10 wont start

real comon starting problem for these is moisture in the cap and rotor and plug wires. replace cap, rotor, and wires. while you have the cap and rotor off check the two vent holles in the base of the distributer to see if the screens are plugged. be careful with the srews that hold the cap on the distibuters are plastic and will break.

Posted on Dec 04, 2008

  • 8 Answers

SOURCE: no fuel

Be sure you have checked the impact safety switch. Your owner's manuual should tell you where it is if it has one. This switch kills the power to the fuel pump after impact. It has a push button reset. Check for voltage at fuel pump to rule out having to change the pump again.

Posted on Jun 02, 2009

pippall
  • 1486 Answers

SOURCE: 1987 chevy S10 engine idle problem

relace the throtle air idle valve.The temp switch will allso cause this problem.

Posted on Jul 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy s10 fuse box diagram


its fuel pump,or/and relay bad

Mar 26, 2014 | 1991 Chevrolet S-10

1 Answer

Chevy s10 fuse box diagram


need to chack fuel regulater

Mar 26, 2014 | 1991 Chevrolet S-10

2 Answers

1988 chevy S10 turns over but won't start getting spark put in new fuel pump,cpu and injector. If I pour A little gas in throttle body hole it will fire for a few sec. fueses all test good.


Hello, just had this problem myself. Check your EGR valve by pulling the vacume line off and pushing up under the valve put your finger over the vacume line hole and release the valve, if it returns to normal position then its bad if not its good. If its bad it needs replaced. Mine did the exact same thing and thats what it was. Hope this helps

Jan 20, 2013 | 1988 Chevrolet S-10

1 Answer

1997 chevy suburban 1500 four wheel drive wont start


ignition contol modual. need to get that check. orielly can check them for free.

Dec 06, 2011 | 1997 Chevrolet K1500

1 Answer

97 chevy blazer w/ 4.3 won't start unless i pour full directly into it....what is causing this. was driving and it just stalled ...fires but won't turn over completely


if you can put fuel in throttle body and it runs. then it is not getting any fuel. check your fuel pump fuse and the relay, if ok, then you may have a bad fuel pump or a plugged up fuel filter. check filter and fuses first. good-day !!

Jul 18, 2011 | 1997 Chevrolet Blazer

1 Answer

Only starts when pouring gas in throttle body


Tried changing the fuel filter? If that's not it it could be a bad pump

Jun 02, 2009 | 1998 Dodge Durango

1 Answer

Chevy S10 Pick 1995 - Sputters and almost stalls when accelerating.


You could have a dirty EGR valve, you can re move it from the manifold and clean it with Throttle body cleaner. Might as well buy two cans, since your cleaning the EGR, might as well clean out the throttle body too.
Spray the throttle body cleaner in to the throttle body with the engine running and try to keep it at 1000 rpm and then to 1500 rpm as you clean out the throttle body and let it idle down for 2 min then turn the engine off. Then turn the engine to the run position for 10 seconds and start and let idle, ro for a test drive and hope that solved the problem, if not there a few more things we can do which will consist for tune up.
Note: Clean the EGR first so you don't burn your self since the engine would still be cool before you clean the Throttle body.
Good luck and keep me posted.

Jun 01, 2009 | 1995 Chevrolet S-10 CA Edition

3 Answers

Stall upon running out of gas but won't start up again with gas


Remove the air cleaner and pour about a quarter cup of gasoline into the carburetor or throttle body. Do not stand near the engine when cranking it -- fire/small explosion hazard.

Apr 21, 2009 | 2002 Chevrolet Venture Passanger

Not finding what you are looking for?
1991 Chevrolet S-10 Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...