Check engine sign came on went to autozone to see what code popped up: P2107 what needs to be done. Autozone kid said I had to take to dealer to reset????
Code p2107 refers to throttle actuator control (TAC) module - processor fault ===causes--- TAC control module
replace the unit and it may be best as auto zone suggested having it done by a reputable accredited dealer service centre as they will have the part on hand and will fit it in the recommended labour time .
SOURCE: 2007 Ford expedition won't start
ur oil pump may be failin-there r sensors everywhere on new cars-keepin u from starting as safety measure-computer systems r complex n things dont always show on 1 scan-they kinda hav the mindset of a pc
Testimonial: "Thank you. I have spoken with 2 other mechanics who said the same thing regarding the oil pump. It's being looked at. So I'll post more once I know"
SOURCE: reset service engine soon light 2004 ford mustang
It is not recomended to disconnect the battery and turn the light switch or horn or anything else on in order to clear codes stored in memory because any settings stored in the computer may be lost too.Go to autozone and rent the scanner to do it yourself.It is very easy,just connect the scanner to the connector located below the dashboard, turn the ignition on but not the engine and follow the prompts then when it says: clear codes?hit yes or enter and that is it.This is the safest way to do it.
SOURCE: 2002 Ford Ranger check engine light indicating misfire
Code P0301
Ignition Coil Pack
Ignition Cable
Spark plug
Clog or dirty fuel injector
Evap canister purge valve
Engine Compression
fuel pressure
you have 3 type of engine for your truck
2.3L 4 cylinder
3.0L 6 Cylinder
4.0L 6 Cylinder
need to know that type Engine
The reason why the service light come on because it is a hard code
not a soft code.
Let me know
SOURCE: 2002 Ford Expedition - service engine soon light
white smoke is condensation in teh exhaust ,this is normal,the computer is just telling you it will need a service soon because the mileage is coming up and the computer reads it ,if it runs ok then leave well alone just have it serviced and ask garage to reset the light
SOURCE: reset ems (check engine light) on ford expedition
Try to remove positive baterry terminal for 20 minutes and install it nack. That will reset your ECU and it will run little rought tilll learn new change in 02 sensor.
456 views
Usually answered in minutes!
×