They worked yesterday, then would not come on. Running lights work just fine and the high beams come on when I pull high beam lever but wont stay on. Any ideals ? Oh, I did check all fuse in fuse box.
SOURCE: all interior and exterior lights work except headlights...
BAD HEADLIGHT CONTROL SWITCH,REPLACE IT BEFORE IT MELTS YOUR DASH,THEY GET VERY HOT WHEN THEY FAIL
SOURCE: low beams do not work, but all the running lights
First, check the lights themselves. Often one goes out and is not noticed...then the other one goes out and right away you think there is a larger problem. If lights are good, check high beam switch on top of steering column. Possible also that you have a lighting module GC"s got them earlier than "regular" cherokee...can't rember when they started using them. Also check under dash wiring...There may be a connector near the heater box in the lighting harness. for some reason they sometimes burn out.
Good luck, hope it's just the lights.
SOURCE: Jeep Headlights not working. High beam works
had the same problem on my 92....check under the hood on the drivers side,towards the front,there is a "junction box" with all of the lighting wires connecting from the switches to the lights.My wires were all corroded inside,so I cleaned the ends and bought a new box from the local electronic supply store.The problem has not come back.
Cheers
161 views
Usually answered in minutes!
×