Scraping and squeaking when in reverse Now sometimes I press the gas pedal and it won'tmove and then all of a sudden it does
What type of vehicle do you have ? Is it 5speed, or automatic, 2wd or 4x4 ?
Testimonial: "Automatic 2WD"
SOURCE: when pressing the gas pedal the engin will make this metal clink
HAVE THE DRIVESHAFT UNIVERSAL JOINTS CHECKED FOR EXCESSIVE WEAR, THEY CAN MAKE THIS TYPE OF NOISE.
SOURCE: cluncking noise when in reverse gear, also squeaking from breaks when not pressed
aftermarket brake and rotors ,also calipers that temporarly stick causes this squeking problem,replace if worn and use special lubrication for these parts including the shims
SOURCE: Steady squeaking noise after taking foot off accelerator
sounds like you have a pad rubbing on a disk/rotor, if you jolt the brakes does the noise go away? if so it's probably a pad loose
SOURCE: a clunk noise comes from the rear underside of the differential.
have the drive shaft U-joints checked for excessive wear. if they are ok the differential carrier bearings are worn and allowing to much gear backlash.
Testimonial: "Thank you for that, I did lift it up and discover that it was the U-joint. Smooth rides ahead. Thanks"
637 views
Usually answered in minutes!
Hi Barbara Nordhoff, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
the car drives fine forward but in reverse there is asqueak that is there when My foot is not on any pedals and now there is a rubbing noise and a hesitation when I begin to back up like something is in the way or rubbing against the tire on the back drivers side
sabrig lx convertale 2001
Weather has been cold and I am hearing grinding noises between park and drive in my Hyndai sonata('06).
×