Question about 1996 Chevrolet Suburban

1 Answer

1996 sububan speakers not working

1996 suburban and the speakers stoped working everything thing else works but the speakers. I had to remove a blown speaker and it was unhooked for awhile and now it dont have any sound.

Posted by on

  • ntory64 May 18, 2009

    its just the one speaker its all of them that stopped working

  • ntory64 May 20, 2009

    none of the wires are touching each other. The cd player will play but i still get no sound at all. I still have the factory deck in it could it be the theftlock system came on? If so does any one know how to fix it?


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 47 Answers

Make sure the wire to the speaker are still connectied and see if the connection is broke you might have it hook up but if its broke its not making contact

Posted on May 18, 2009

  • Vladamiretal May 19, 2009

    check the connection in the one you change then make sure you dont have two wire touching behind the deck that will shut them off what its doing is grounding out the positive side of the connection


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why arn't my rear speakers and rear radio controls not working in my 2001 Suburban LT

1st thing simple ck all fuses did the radio go out
ar the same time as control and speakers
ck fuse first then take out and send to have looked
at maybe control unit hock up deferent spekers to rear
to see if there not blown then send out.

Jun 23, 2014 | 1999 GMC Suburban

1 Answer

1996 chevy suburban high beams work, low beams and daytime running lights don't. checked all fuses none blown, dont know how to check relays except to replace each one, one at at a time.

with a test light back probe the green wire behind the low beam then if test light on = bulb defect
the blue one is for daytime running lights example : if 1 bulb is burn or open no daytime running lights
p.s. you need to have 2 bulbs the same or it won't work

Aug 05, 2013 | 1996 GMC Suburban

1 Answer

My speedometre stoped working in my suburban 2001, everything else works fine

01 Suburban has an electronic speedo which works by way of a speed sending unit on the tail end of the driver's side of the transmission. Replace that speed sending unit if there is any transmission fluid coming out of the plug entrance (where the wires plug into the sensor). Could also be a speed sensor mounted on the top of the differential, but less likely. Do get it fixed because either one of these could cause shifting problems in the transmission... Ugly.

Aug 09, 2012 | 2001 Chevrolet Suburban

1 Answer

Radio comes on but no sound

hi firstly i suggest you remove the radio from the dash at the rear you will notice a block at the bottom of the radio these are your speaker wires remove this block its likely that the pa stage has blown but just check it with another radio if you can get one this will ilimanate the following .if the speakers work with another radio then the fault lies in the radio itself and more than likely the output has blown hope this helps you goodluck

Mar 19, 2011 | 2002 Chevrolet Suburban

1 Answer

I cannot get the spark boot loose on a 2003 chevrolet sububan with heat shield on the plug. any hints

needle nose pliers pull heat shield off then take a regular pair of pliers on boot and remove plug wire

Sep 18, 2010 | 2003 Chevrolet Suburban

2 Answers

1996 chevy tahoe - radio not working

My mothers 96 Tahoe did the same thing last year. It was a blown speaker in the rear causing her problem. Hope this helps.

Dec 30, 2009 | 1996 Chevrolet Tahoe

1 Answer

I have a 1993 Honda Civic it started overheating was using alot of coolant, then heater stoped working, started it in the morning drove about 3 miles was'nt overheating yet, and it died turns over but will...

More then likely you got a blown head gasket, remove spark plugs and crank engine, if water come out of spark plug holes, blown head gasket.Good luck

Dec 17, 2009 | 1996 Honda Civic

1 Answer

Radio and blinkers wont work what fuse controls these two things

two seperate problems check for power at fuse box possible blown fuse link on starter

Jul 12, 2009 | 1996 GMC Suburban

1 Answer

What is the order of alinment of vacuum lines 1984 chevy sububan

should be a scematic under the hood. either on the inside of the hood or the radiator cross member

Jun 11, 2009 | 1984 Chevrolet Suburban

3 Answers

Rear door speakers don't work w/ aftermarket radio in 94 suburban

You need to attach the blue wire on the stereo harness to the blue and white wire on the car adapter harness. they installed a small amplifier to power the rear door speakers and unless you connect those two wires then the speakers will not work.

Jan 05, 2009 | 1994 Chevrolet Suburban

Not finding what you are looking for?
1996 Chevrolet Suburban Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides