At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes ,,instructions are below, Use eye protection for this procedure Remove or Disconnect:
Relieve Fuel Pressure
Disconnect negative battery cable
Raise vehicle on hoist
Remove Fuel Tank
Remove Fuel Gage sending and pump assembly by turning cam lock ring counterclockwise.
Lift assembly from fuel tank and remove fuel pump from fuel gage sender unit.
Disconnect pump wires, hose clamps, and clamp around pump body
Pull pump assembly out of rubber connectors
Inspect fuel pump attaching hose for any signs of deterioration. Replace as
necessary.
Install or Connect:
Push fuel pump assembly into attaching hose
Connect pump wires, hose clamps at attaching hose and around pump body
Place Fuel tank sending unit and pump assembly into tank using new O-ring
Place cam lock over assembly and lock by turning clockwise
Install Fuel Tank
Start engine and check fuel pipe connector for visual leaks
first you need to relive the fule system of pressure. do this by finding your fule pump relay disconecting it and start the car. it will sputer, this is reliveing fule pressure.once it stops sputering your ready to get the fule pump out. it is located in the fule tank. the tank is held on by 2 straps your going to have to take off. once you do that drop the tank and the pump will be on top of it.
It most definatly is in the tank. and the tank will have to be dropped. Unless you have a lift, it will be a pain in the ****. Especially if there is a full tank of gas.
Unfortunetly Cadillac does not have an access panel for fuel pump access until the newer years. You will need to drop the tank. Also, don't let the tank come slamming to the ground, make sure you take it slow so you dont dammage the lines to the sending unit.
Sorry. Got to drop the tank. Just break the gas tank bolts and replace them with new ones. If the straps are badly rusted, replace them, too. Look for tank leaks on the top of the tank. Replace the sock on the fuel pump.
A 1996 Bronco fuel pump is in the tank. The tank will have to be dropped. After that, it's quick & easy. The filter is on the rail, not so easy even with the line removal tools. Wear safety glasses in case of any pressure.
×