Question about Mazda Protege

Open Question

Repairing mazda 323 bj door LATCH] - Protege Mazda Cars & Trucks

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75197 Answers

SOURCE: Problem with the BMW 323

Hello
Need the specific year ans model please, also is this a power pull down latch and exactly what is it doing. I will say that trunk latches are not repaired just replaced with few exceptions, replacement is very easy as they are secured by in place in most cases with just 2 bolts. Before you replace the latch make sure the adjustment for the latch striker is not loose or out of adjustment. look for Marks where bolts are and make sure the latch retaining bolts heads are centered over the marks on the paint, these are the marks left in the paint by the factory when the bolts were first tightened.

Posted on Jun 30, 2011

  • 975 Answers

SOURCE: Trying to remove mazda 323 rear door panel!

There is a spring clip on the shaft,might be able so snag it with
small hook but the tool is pretty cheap

Posted on Mar 19, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I connect vacuum and electric wiring for my Mazda 323 1996 carburetor? What is the diagram for properly connecting the carburetor to this 1996 Mazda 323?


You will require service manual for car, or the repair manual. Usually available at auto parts stores. Diagrams can be found on the web user browser search engine and " 1996 Mazda 323 Engine Fuel system diagram"

Mar 09, 2015 | Mazda Cars & Trucks

1 Answer

Trying to remove mazda 323 rear door panel!


There is a spring clip on the shaft,might be able so snag it with
small hook but the tool is pretty cheap

Mar 19, 2013 | Mazda 323 Cars & Trucks

2 Answers

I need a 1998 mazda 323 ba immobiliser bypass key or another solution to start my car. Can anyone help me?


I know this question is old but I recently encountered a similar problem with my 1995 323 BA and this may help someone else. Override the immobilizer by doing the following:


open the car via the drivers door
put the key in the ignition
turn the key to ACC
now turn the key to ON
repeat the last 2 steps X 12 quickly (ignore the indicators flashing and the central locking activating).
the dashboard should be lighting up as normal.
Now turn the key to START

Sep 26, 2011 | 1994 Mazda 323

1 Answer

Where can i get a workshop manual for a mazda 323f gxi deisel 5 door hatch.


Hi:
a good place to check is:

www.alldatadiy.com

for about $27 you can get a subscription for your car that is an excellent source of repair knowledge!

Jan 31, 2010 | 1994 Mazda 323

2 Answers

HOLD LIGHT FLASHING ON DASH PANEL


There's most likely an issue with your transmission. Bring it to a shop to have it scanned for any codes

Sep 16, 2009 | 1994 Mazda 323

2 Answers

Mazda 323f: Rain water leak into cabin on drivers side, low down.


I am fixing a similar problem on my daughter's 2002 323 Hatchback (Australian BJ model, RH drive) at the moment. Rainwater comes in from above the clutch pedal.

If you look down thru the vents in front of the windshield near the wipers, you will see a spot-welded body seam running across the bottom of that recess. This is where hers is leaking. I originally sealed it with a RTV silicone sealant which fixed the problem but after approximately 6 months it has started leaking again. I am going to remove the silicone and seal over the seam with a brushable bitumen -type sealer.

Remove windscreen wipers and the vent panel for easy access to the area.

Mar 24, 2009 | 1994 Mazda 323

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...