Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Oct 14, 2013

Wiring diagram ford econovan maxi 1995 - Ford Cars & Trucks

5 Related Answers

Anonymous

  • 170 Answers
  • Posted on Apr 16, 2009

SOURCE: I need the starter relay wiring for a 1995 ford

Try autozone.com

Ad

Anonymous

  • 19 Answers
  • Posted on Jun 22, 2009

SOURCE: wiring diagram wiper motor Ford Thunderbird 1995

If the same as on a 93 the wiper motor has two connectors.

Connector A (motor):

wiper switch to motor (high) - dark brown / orange
wiper switch to motor (low) - white
ground - black

Connector B (park switch):

wiper switch to motor (park and return) - red
wiper switch to motor (park return) - black
ground - black

Hope this helps.

Anonymous

  • 3400 Answers
  • Posted on Mar 19, 2011

SOURCE: i need the tappet setting

There's NO code for noisy lifters. Depending on miles and previous maintenance (oil changes, etc) your lofters are probably worn. They need to be replaced and you might have an oil pressure test done to make sure there's is adequate oil pressure.

Anonymous

  • 161 Answers
  • Posted on Mar 20, 2011

SOURCE: Unidentified hose. I have a Ford Econovan, which

2nd hose is for you positive crankcase ventilation(PCV) valve hose....(like a breather hose)

Testimonial: "Called the service center and read the Haynes manual, they both say the same thing. Spot on!"

clifford224

Clifford Beard

  • 1975 Answers
  • Posted on Aug 11, 2011

SOURCE: LOOKING FOR FUSE BOX DIAGRAM

Ther are 2 panels that have fuses in it. I went on and gave you both (see below). this should be in your owners manual if you have one. If you do not and would like a copy of the owners manual for your vehicle, you can email me at [email protected] with your make, model and year and I will be happy to email you a copy. No worries there would be no cost for it. I hope this helps and good luck.


clifford224_337.jpg
clifford224_338.jpg
clifford224_339.jpg
clifford224_340.jpg
clifford224_341.jpg
clifford224_342.jpg

clifford224_343.jpg
clifford224_344.jpg
clifford224_345.jpg
clifford224_346.jpg
clifford224_347.jpg

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

My 1993 ford econovan maxi engine is missing - what is the likely cause?

missing check the spark plugs is the first thing to look at. check the color of them, if any of them are wet or if one is not the same color as the rest. check these first.
0helpful
1answer

I have a 1993 ford Econovan maxi . I have ignition point . What is the gap on the ignition point . Thanks

point gap is .40 to .50 mm ( point 4 to point 5 mm) or .015 to .20"
most point distributors are at the .02 " mark but check and adjust as points to wide will misfire under load or lack power if too close
point gap variations can change ignition timing
1helpful
1answer

Sorry i forgot to mention with the lights only working on high beam it's a ford econovan maxi auto 94 do you think its a fuse?

could be the switch stalk if also no dash board lights. Check if voltage going to relay with volt meter or 12V light probe
you can pull out relay and check terminals or jump wire to do relay function to test fuse and globe. A determine if swich is faulty


25785300-5toaxnpomibennkke0mqwyu0-2-0.jpg
0helpful
1answer

How much water goes into the cooling system of a ford econovan maxi 1995

depending on which engine you have ,you are looking at 12 to 16 litres when empty
0helpful
1answer

FORD ECONOVAN MAXi 2.0 Hi, i have a serious creaking and groaning noise from the front nearside when I hit a bump or speed hump could I need a new shock absorber? I dont get the bump I would expect

It could be your shock/strut for sure. It could also be other suspension parts like the control arm or ball joints but I would suspect shocks first. If you arent extremely proficient, I would leave this repair to the pros. It isnt hard but it is incredibly dangerous. To get the old shock off you need to compress the spring with a special tool, and once it is compressed, it is like a bomb waiting to go off and could easily kill you. Take it to a shop and have them confirm the problem then do the repair. It should be around 150 for the part ( or less!) and another 100 for the labor.
1helpful
1answer

Stem seals replaced. still smoke from exhaust after sitting all night ok after warm up

Could be left over residue burning itself out. Could be the seal is not properly seated and it starts to smoke then after it warms up the seal heats up and forms a better seat by seating itself. Give it a few days and if problems consists reapply the seal and tighten all bolts evenly at a little at a time
3helpful
2answers

Valve clearances for a ford econovan 1.8lt, 1990

what are the valve clearance specs for a 1990 ford econovan maxi
Not finding what you are looking for?

445 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...