Question about Ford Expedition
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
There are four o2 sensors on this truck. one on each side just below the exhaust manifold, and one on each side behind the second catalytic converters. (just about even with the back of the front doors.
Posted on Jun 18, 2008
the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply
Posted on Oct 11, 2008
They are round "cans" with wires attached. You should have SSA, SSB, SSC, Torque converter and Pressure Control solenoids. They control pressures and have no mechanical linkage.
Posted on Oct 25, 2009
Take the vehicle to any local auto parts store that will read the codes. WRITE THEM DOWN, and report back here for further help.
Posted on Dec 21, 2009
The entire assy. This uses a cable system and what you are hearing is the cable twisting and getting ready to snap. New units are available at Advance Auto parts
Posted on Jan 14, 2010
Tips for a great answer:
Sep 03, 2016 | 1997 Ford Expedition
Dec 11, 2014 | Ford Cars & Trucks
Jan 22, 2011 | 1999 Ford Expedition
Oct 16, 2010 | 2003 Ford Expedition
Jan 14, 2010 | 2007 Ford Expedition Eddie Bauer EL
Dec 21, 2009 | 1998 Ford Expedition
Oct 30, 2009 | 2000 Ford Expedition
Oct 17, 2009 | 1998 Ford Expedition
Sep 12, 2008 | 2001 Ford Expedition
Jul 20, 2018 | Ford F-150 Cars & Trucks
18 people viewed this question
Usually answered in minutes!