Question about 1995 Eagle Talon
I have a non turbo talon that would start and run fine when cold but start to sputter while cruising and surge and rev up uncontrolably at idle before dying. If i let it cool down a bit I could drive it again a short distance before it would happen again. I could also keep the car going in first gear (5 speed manual transmission) if i didnt have to come to a stop. It sounds like it's running on only one cylinder. But when it cooled down it start and run fine. It would never overheat either. There was just a certain distance or time you could travel before it would start to miss. I drove the car like this for awhile and seemed to just get worse over time. What should i check? ECU maybe?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 95 eagle talon!!!!!!!!!!!
Start with oxygen sensor and than work your way to the computer. there are several sensors. it can also be your fuel pump. that sometimes happens when either pump or fuel filter are clogged or broken
Posted on Jun 13, 2008
SOURCE: my eagle talon will not start
Search for a way to reset the alarm. Also take the fuel lines off the engine and test the fuel pressure. You want to eliminate the fuel pump not working. If it has a reset button for the fuel pump try that. I would start at the fuel pump and worlk my way up.
Posted on Sep 19, 2008
Check the bolt pattern on both transmissions. they should be a match but may need a washer to make up for the depth of the neon trans
Posted on Feb 03, 2009
Tips for a great answer:
Sep 16, 2013 | Cars & Trucks
Apr 02, 2010 | 1995 Eagle Talon
Feb 19, 2010 | 1993 Eagle Talon
Jan 21, 2010 | 1995 Eagle Talon
Nov 08, 2009 | 1992 Eagle Talon
Nov 22, 2008 | 1995 Eagle Talon
Jul 21, 2008 | 1994 Eagle Talon
114 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: