Hi, My name is santy i have got 2004 automatic transmission honda city it was running perfactly fine but 4 days back drive mode "D" started blinking on dashboard meter screen, once get started blinking pickup gets dead, i get it checked in honda service station but they asked to change the pressure kit which contains clutch..i get it checked from from outside machanic change the pressure roller but no use..please help..
SOURCE: Change Automatic Transmission oil
Honda's are drain and refill only.The filter is internal inside the transmission and can only be accessed during an overhaul.On the bottom of the transmission case is a drain plug that is gold in color.It is removed using a 3/8" ratchet,or extension with a ratchet atached.There is also an aluminum washer that must be kept track of and reinstalled with the drain plug or a leak will occur.After draining the trans,and reinstalling the drain plug,Honda genuine automatic transmission fluid,or an equivalent with a highly fricition modified additive must be used,or harsh shifting can occur.I would install about 3 quarts after draining,and start checking the level at this point.The fluid level is checked with the engine OFF,on level ground.
SOURCE: blinking dashboard drive light
The light is blinking to let u know that an electronic failure has occured in the transmission, u may feel nothing wrong or it could fail next week, get it tested for the trouble code that is stored in the trans computer control module.
SOURCE: Transmission won't shift fron 1st, 2nd or 3rd correctly!
Sorry to inform you that it sounds like your transmission needs servicing.
Check the fluid levels and replenish if level is down.
If after doing this,the car still wont shift properly or smoothly,,then you will have to take the car into a transmission mechanic.
115 views
Usually answered in minutes!
×