If I understanding right, you set the timing on your mazda. you may have set timing on the exhaust stroke. Rotate the crankshaft again with the belts off and realign the timing marks. You need the number 1 cylinder top dead center on the compression stroke not the exhaust stroke. Also take off distributor cap and make sure rotor is pointing toward number 1 cylinder spark plug wire when at top dead center. Hope this is what you were asking.
SOURCE: 2001 mazda protege will not start
well, with all that you have changed the only two possible things that are left PCM and the ECM....
Do you have an alarm system on this vehicle? If you purchased this car second hand it may have something that is inhibiting the engine from firing. From what you have told us here that would be where I would start looking.
I really hope this is helpfull
SOURCE: 2001 FORD TAURUS 24 VALVE DOHC MOTOR WILL NOT START
i have a 2001 taurus 24valve dohc 3.0 engne i have a bad coil pack what steps do i need to do to change the coil pack
SOURCE: 2003 mazda protege idles rough and shakes, almost stalls
What about new spark plugs and wires?
184 views
Usually answered in minutes!
×