2001 chevy s10 blazer abs light stays .

The abs is a add on for the brakes that when the tires come into a skid or slid they wont lock up..Your brakes will still work great with the abs disabled but your brakes will lock up if you push on the brakes hard enough to stop.Mainly abs works in slippery conditions not letting the tires lock up and keep the car rolling instead of making it slide..But no effect of the brakes will happen..Just make sure your fluid is full and there are no leaks and if you want to get them check you can stop by your local Auto Zone and they will scan your car for free and tell you what sensor is bad..I hope this was helpful to you...Have a great night

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589

Hi, this is the abs sending unit(module/sensor). this sensor/module seems to be malfunctioning and it will need to be replaced. there may just be a lose connector but, most of the time, the abs light will come on if anything is not normal in this area. I recommend taking it in for a look. replacing the sensors will fix this and the light will go off. The abs


Please rate and have a great evening:)